©2015–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other
trademarks and service marks are the property of their respective owners.
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace
& defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization
devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete
components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products;
Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is
headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Fax: +1 (949) 215-4996
Email: sales.support@microsemi.com
www.microsemi.com
VPPD-04012. 1.1. 8/16
Best-in-Class Power Consumption
• Voltage-mode architecture line-drivers with integrated
termination resistors
• EcoEthernet 2.0 green energy effi ciency modes with ActiPHY
automatic link power down, PerfectReach™ intelligent cable
algorithm, and IEEE 802.3az (including connection to legacy
MACs not supporting IEEE 802.3az)
• Optimized power consumption for all link speeds
Superior PHY and Interface Technology
• Two integrated 10/100/1000BASE-T Ethernet copper
transceivers (IEEE 802.3ab compliant) with VeriPHY™ cable
diagnostics
• Two dual media copper/fi ber ports with unidirectional IEEE
802.3ah support
• SGMII and QSGMII SerDes MAC interface
• Patented line driver with low EMI voltage mode architecture
and integrated line-side termination resistors
• HP Auto-MDIX support
• Integrated AC-coupling capacitors for SGMII interface
• Jumbo frame support up to 16 kB with programmable
synchronization FIFOs
Advanced Carrier Ethernet Support
• Recovered clock outputs with programmable clock squelch
control and fast link failure indication (typical <1 ms) for G.8261
SyncE applications
• Flexible transmit and receive frequency timing per PHY port
• 1000BASE-T ring resiliency for switching between master/slave
timing while maintaining linkup
• Integrated dual I2C MUX to control SFP and PoE modules
• IEEE 802.3bf timing and synchronization support
Key Specifi cations
• 1.0 V core and 2.5 V I/O power supplies
• 3.3 V-tolerant 2.5 V inputs
• QSGMII v1.3, SGMII v1.9 and IEEE 1149.1 JTAG boundary
scan support
• Compliant with IEEE 802.3 (10/1000BASE-T, 10BASE-Te,
100BASE-TX, 100BASE-FX, and 1000BASE-X)
• Operating temperature range for VSC8562XKS-11 is 0 °C
ambient to 125 °C junction. Operating temperature range for
VSC8562XKS-14 is –40 °C ambient to 125 °C junction
Related Products
Visit www.microsemi.com for information about these related
products:
• 1 GbE PHYs
• 10 GbE PHYs
VSC8562
Dual Port QSGMII/SGMII Dual Media GbE PHY with Intellisec™
Serial MAC Interface (SerDes)
Auto-Negotiation (QSGMII, SGMII, FIFOs)
Host MAC and Flow Control Buffer
Line MAC and Flow Control Buffer
MDI
Twisted Pair
Interface
1000BASE-X
PCS and
AutoNeg
10/100/
1000BASE-T
PCS and
AutoNeg
100BASE-FX
PCS and
AutoNeg
1000BASE-X
PMA
10/100/
1000BASE-T
PMA
100BASE-FX
PMA
10/100/1000BASE-T
SFP Data Path
Sync Ethernet
MDI
SerDes
Interface
and
Two-Wire
Serial
Mux
PLL
and
Analog
LED Interface
JTAG
Management
and
Control Interface
(MIIM)
MAC
Media/Line