–3–REV. C
AD9283
Test AD9283BRS-100 AD9283BRS-80 AD9283BRS-50
Parameter Temp Level Min Typ Max Min Typ Max Min Typ Max Unit
DYNAMIC PERFORMANCE
5
Transient Response 25°CV 2 2 2 ns
Overvoltage Recovery Time 25°CV 2 2 2 ns
Signal-to-Noise Ratio (SNR)
(Without Harmonics)
f
IN
= 10.3 MHz 25°C I 46.5 47 44 47 dB
f
IN
= 27 MHz 25°C I 46.5 44 47 47 dB
f
IN
= 41 MHz 25°C I 43.5 46.5 47 dB
f
IN
= 76 MHz 25°C V 46.0 dB
Signal-to-Noise Ratio (SINAD)
(With Harmonics)
f
IN
= 10.3 MHz 25°C I 45 47 43.5 46.5 dB
f
IN
= 27 MHz 25°C I 45.5 43.5 46.5 46 dB
f
IN
= 41 MHz 25°C I 42.5 45 42 dB
f
IN
= 76 MHz 25°C V 42.5 dB
Effective Number of Bits
f
IN
= 10.3 MHz 25°C I 7.3 7.5 7.6 Bits
f
IN
= 27 MHz 25°C I 7.4 7.5 7.5 Bits
f
IN
= 41 MHz 25°C I 7.3 7.5 Bits
f
IN
= 76 MHz 25°C V 6.9 Bits
2nd Harmonic Distortion
f
IN
= 10.3 MHz 25°C I 57 60 55 60 dBc
f
IN
= 27 MHz 25°C I 60 55 60 56 dBc
f
IN
= 41 MHz 25°C I 50 58 55 dBc
f
IN
= 76 MHz 25°CV 46 dBc
3rd Harmonic Distortion
f
IN
= 10.3 MHz 25°C I 54.5 70 55 70 dBc
f
IN
= 27 MHz 25°C I 55 55 62.5 60 dBc
f
IN
= 41 MHz 25°C I 47 52.5 60 dBc
f
IN
= 76 MHz 25°CV 53 dBc
Two-Tone Intermod Distortion
(IMD)
f
IN
= 10.3 MHz 25°C V 52 52 52 dBc
NOTES
1
Gain error and gain temperature coefficient are based on the ADC only (with a fixed 1.25 V external reference).
2
t
V
and t
PD
are measured from the 1.5 V level of the ENCODE input to the 50%/50% levels of the digital outputs swing. The digital output load during test is not to
exceed an ac load of 10 pF or a dc current of ± 40 µA.
3
Power dissipation measured with encode at rated speed and a dc analog input.
4
Typical thermal impedance for the RS style (SSOP) 20-lead package: θ
JC
= 46°C/W, θ
CA
= 80°C/W, θ
JA
= 126°C/W.
5
SNR/harmonics based on an analog input voltage of –0.7 dBFS referenced to a 1.024 V full-scale input range.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*
V
D
, V
DD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 V
Analog Inputs . . . . . . . . . . . . . . . . . . . . –0.5 V to V
D
+ 0.5 V
Digital Inputs . . . . . . . . . . . . . . . . . . . –0.5 V to V
DD
+ 0.5 V
VREF IN . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
D
+ 0.5 V
Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Operating Temperature . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . . 150°C
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . 150°C
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD9283 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
ORDERING GUIDE
Temperature Package Package
Model Ranges Descriptions Options
AD9283BRS
-50, -80, -100 –40°C to +85°C 20-Lead SSOP RS-20
AD9283/PCB 25°C Evaluation Board
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions outside of those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods may affect device reliability.
WARNING!
ESD SENSITIVE DEVICE
