OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ELG-240-C2100D2

P1-P3P4-P6P7-P9P10-P11
File Name:ELG-240-C-SPEC 2018-05-29
178.5~240W Constant Current Mode LED Driver
ELG-240-C series
■ Features ■ Applications
■ Model Encoding
- C1750ELG -
240
A
Output wattage
Series name
■ Description
ELG-240-C series is a 240W LED AC/DC driver featuring the constant current mode and high
voltage output. ELG-240-C operates from 100~305VAC and offers models with different rated
current ranging between 700mA and 2100mA. Thanks to the high efficiency up to 93%, with
the fanless design, the entire series is able to operate for -40 ~+85 case temperature under℃℃
free air convection. The design of metal housing and IP67/IP65 ingress protection level allows
this series to fit both indoor and outdoor applications. ELG-240-C is equipped with various function
options, such as dimming methodologies, so as to provide the optimal design flexibility for LED
lighting system.
Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
<0.5WNo load / Standby power consumption
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
Typical lifetime>50000 hours
5 years warranty
LED street lighting
LED harbor lighting
LED bay lighting
LED greenhouse lighting
LED flood lighting
Type HL for use in Class I, Division 2
(Classified) location.hazardous
Rated output current (700/1050/1400/1750/2100mA)
Function options
Type
Blank
A
B
IP Level
IP67
IP65
IP67
Io fixed.
Io adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Function Note
In Stock
In Stock
In Stock
MM
110
IP67
IP65
Type HL
8
(for DA-Type only)
DA
Dx
D2
IP67
IP67
IP67
DALI control technology.
Built-in Smart timer dimming function by user request.
Built-in Smart timer dimming and programmable function.
In Stock
By request
In Stock
Input wiring type
Blank:2-wire input for standard model
-
{
3Y:3-wire input for standard model
IS 15885(Part 2/Sec13)
R-41027766
THOMAS SAMUEL
THOMAS SAMUEL
(for 700A,1050Aonly)
AB IP65
Io adjustable through built-in potentiometer &
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
In Stock
178.5~240W Constant Current Mode LED Driver
ELG-240-C series
SPECIFICATION
MODEL
RATED CURRENT
RATED POWER
OUTPUT
CURRENT ADJ. RANGE
SET UP TIME
Note.4
VOLTAGE RANGE Note.3
FREQUENCY RANGE
POWER FACTOR
(Typ.)
EFFICIENCY (Typ.)
AC CURRENT(Typ.)
INPUT
INRUSH CURRENT
(Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER TEMPERATURE
OVER VOLTAGE
800ms/115VAC, 500ms/230VAC
(Please refer to "STATIC CHARACTERISTIC" )
section
47 ~ 63Hz
PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
2.2A / 115VAC 1.5A / 230VAC 1.2A/277VAC
<0.75mA / 277VAC
Compliance to
EN55015,EN61000-3-2 Class C (@load 50%) ; EN61000-3-3; GB17625.1, GB17743≧ ;EAC TP TC 020
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 60 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
EMC EMISSION
SAFETY &
EMC
PROTECTION
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
CURRENT TOLERANCE
±5.0%
CONSTANT CURRENT REGION
Note.2
THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
TOTAL HARMONIC DISTORTION
OPEN CIRCUIT VOLTAGE
(max.)
Adjustable for A/AB-Type only (via built-in potentiometer)
COLD START 75A(twidth= s measured at 50% Ipeak)/230VAC450 Per NEMA 410μ;
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC
Tcase=-40 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃
MAX. CASE TEMP.
Tcase=+85℃
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV);EAC TP TC 020
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.℃
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
CURRENT RIPPLE 5.0% max. @rated current
100 ~ 305VAC 142 ~ 431VDC
No load power consumption <0.5W for Blank / A / Dx / D2-Type
NO LOAD / STANDBY
POWER CONSUMPTION
Standby power consumption <0.5W for B / AB / DA-Type
ELG-240-C700
ELG-240-C1050
ELG-240-C1400
ELG-240-C1750
ELG-240-C2100
700mA
1050mA
1400mA
1750mA
2100mA
240.1W
239.4W
239.4W
239.75W
241.5W
172 ~ 343V
114 ~ 228V
86 ~ 171V
69 ~ 137V
57 ~ 115V
360V
239V
180V
144V
120V
350 ~ 700mA
525 ~ 1050mA
700 ~ 1400mA
875 ~ 1750mA
1050 ~ 2100mA
93%
93%
93%
93%
93%
380 ~ 435V
250 ~ 290V
192 ~ 216V
153 ~ 175V
128 ~ 156V
958.9K hrs min. Telcordia SR-332 (Bellcore) 235Khrs min. MIL-HDBK-217F (25 )℃
2**344 71 7.5 mm (L*W*H)
1.22Kg; 12pcs /15.2kg / 0.72CUFT
UL8750 independent, EN62384;(type”HL”), CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13
GB19510.14,GB19510.1; IP65 or IP67 approvedBIS IS15885(for 700A/1050A only)
200VAC ~ 305VAC
100VAC ~ 180VAC
179.9W
179.55W
179.2W
178.5W
180.6W
DALI STANDARDS
Compliance to IEC62386-101, 102, 207 for DA-Type only
File Name:ELG-240-C-SPEC 2018-05-29
178.5~240W Constant Current Mode LED Driver
ELG-240-C series
BLOCK DIAGRAM
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
100
50
(min.)
Vo(%)
50
100
Io(%)
Constant
Current area
Hiccup
Protection
DETECTION
PWM & PFC
CIRCUIT
O.L.P.O.T.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS
Vo+
Vo-
I/P
CONTROL
O.V.P.
&
O.L.P.
PFC
CIRCUIT
O.T.P.
PFC CONTROL
DIM+
(B Type)
DIM-
CASE :Protective Earth
File Name:ELG-240-C-SPEC 2018-05-29
P1-P3P4-P6P7-P9P10-P11

ELG-240-C2100D2

Mfr. #:
Buy ELG-240-C2100D2
Manufacturer:
MEAN WELL
Description:
LED Power Supplies 241.5W57-115V 2100mA CC IP67 Smart Timer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet