No. MATERIAL NAME
MATERIAL REMARKS
PRODUCT NAME or MODEL,TITLE
DC-DC CONVERTER UNIT CC25-xxxxxF-E Series
PAGENAME OF DRAWING DRAWING No.
PRODUCT SPECIFICATIONS TRSA-0292-3 /
TDK CORPORATION
QU
13
9
Product
CC25-24xxSF-E
Output Capacitor
range
470mF max.
[9] Packaging and Marking
Components are packaged to prevent damage from moisture and handling. The following items shall be marked.
1. Manufacturer's part number CC25-xxxxxF-E (Ex: CC25-2405SF-E)
2. Name of manufacturer TDK
[10] Environment
[11] Test Condition
Under normal condition, it will operate even without connecting an external capacitor.
However, if there is a desire to further decrease noise or if the pattern layout is too long,
connect a capacitor within the range shown in the table below.
Unless specified otherwise, the following specification applies:
Ambient Temperature:20±15°C Relative Humidity:65±20%
[12] Other precaution
We recommend that the substrate not be washed after soldering.
However, depending on the conditions, it is possible in some situations,
therefore consult us concerning this.
This product is certified to the following safety standards :
UL60950-1, CUL(CSA 60950-1), EN60950-1 (NEMKO)
10V or less
100ms or more
-Vin
+Vin
10~18V
10~Vin V
100ms or more
-Vin
+Vin
10~18V
8-8. Shutdown Reset Condition
To reset all functions, make the following condition:
Adjust the input voltage to 10V or less and the time to 100ms or more.
The remote terminal is turned off at 100ms or more (10V or more).
This product complies with Restriction of Hazardous Substances (RoHS) directive that refers to the regulation of
harmful substances by the European Union (EU) effective July 1, 2006. The directive bans the use of six specific
harmful substances in electric and electronic devices and products handled within the EU. The six substances
are lead, mercury, cadmium, hexavalent chromium, PBB (polybrominated biphenyls), and PBDE (polybrominated
diphenylethers).
