MAX1564ETE+T

MAX1564
Triple 1.2A USB Switch in 4mm x 4mm
Thin QFN
10 ______________________________________________________________________________________
If the output current exceeds the current-limit threshold,
or the output voltage is pulled below the short-circuit
detect threshold, the MAX1564 enters a fault state after
20ms, at which point auto-restart mode is enabled and
25mA is sourced by the output. For a 5V input, OUT_
short circuited to GND, and auto-restart mode active,
the power dissipation is as follows:
P = 0.025A x 5V = 0.125W
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
16 TQFN-EP T1644-4
21-0139
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages
. Note that a “+”, “#”, or “-” in
the package code indicates RoHS status only. Package draw-
ings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
Chip Information
PROCESS: BiCMOS
MAX1564
Triple 1.2A USB Switch in 4mm x 4mm
Thin QFN
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________
11
© 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
Revision History
REVISION
NUMBER
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
0 4/01 Initial release
1 2/10 Removed UL Certification Pending bullet from Features section 1

MAX1564ETE+T

Mfr. #:
Manufacturer:
Maxim Integrated
Description:
Power Switch ICs - Power Distribution Triple 1.2A USB Switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet