1. General description
The 74AUP1G125-Q100 provides a single non-inverting buffer/line driver with 3-state
output. The 3-state output is controlled by the output enable input (OE
). A HIGH level at
pin OE
causes the output to assume a high-impedance OFF-state. This device has the
input-disable feature, which allows floating input signals. The inputs are disabled when the
output enable input OE
) is HIGH.
Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire V
CC
range from 0.8 V to 3.6 V. This device ensures a very low
static and dynamic power consumption across the entire V
CC
range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using I
OFF
. The I
OFF
circuitry disables the output, preventing a damaging backflow current through the device
when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide supply voltage range from 0.8 V to 3.6 V
High noise immunity
Complies with JEDEC standards:
JESD8-12 (0.8 V to 1.3 V)
JESD8-11 (0.9 V to 1.65 V)
JESD8-7 (1.2 V to 1.95 V)
JESD8-5 (1.8 V to 2.7 V)
JESD8-B (2.7 V to 3.6 V)
ESD protection:
MIL-STD-883, method 3015 Class 3A. Exceeds 5000 V
HBM JESD22-A114F Class 3A. Exceeds 5000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
Low static power consumption; I
CC
= 0.9 A (maximum)
Latch-up performance exceeds 100 mA per JESD 78 Class II
Inputs accept voltages up to 3.6 V
Low noise overshoot and undershoot < 10 % of V
CC
Input-disable feature allows floating input conditions
I
OFF
circuitry provides partial Power-down mode operation
74AUP1G125-Q100
Low-power buffer/line driver; 3-state
Rev. 1 — 20 March 2013 Product data sheet
