OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TCJC106M035R0200

P1-P3P4-P6P7-P9
113
022717
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS
with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalog limit post mounting.
For typical weight and composition see page 223.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
TCJ Series
Conductive Polymer Solid Electrolytic Chip Capacitors
RATINGS & PART NUMBER REFERENCE
Rated
Maximum
DCL DF
ESR
100kHz RMS Current (mA)
AVX Case
Capacitance
Voltage
Operating
Max. Max.
Max.
MSL
Product
Part No. Size (μF)
(V)
Temperature
(μA) (%)
@ 100kHz
45ºC 85ºC 105ºC 125ºC
Category
(ºC) (mΩ)
50 Volt @ 85°C
TCJB684M050#0400 B 0.68 50 105 3.4 6 400 3 600 400 300 – 3
TCJB105M050#0300 B 1.0 50 105 5 6 300 3 600 400 300 – 3
TCJB155M050#0300 B 1.5 50 105 7.5 6 300 3 600 400 300 – 3
TCJC155M050#0300 C 1.5 50 105 7.5 6 300 3 800 600 400 – 3
TCJC225M050#0300 C 2.2 50 105 11 6 300 3 800 600 400 – 3
TCJC335M050#0200 C 3.3 50 105 16.5 8 200 3 900 600 400 – 3
TCJC475M050#0200 C 4.7 50 105 23.5 8 200 3 900 600 400 – 3
TCJX475M050#0250 X 4.7 50 105 23.5 6 250 5 800 600 400 – 2
TCJY475M050#0250 Y 4.7 50 105 23.5 6 250 5 900 600 400 – 2
TCJC685M050#0200 C 6.8 50 105 34 8 200 3 900 600 400 – 3
TCJD685M050#0120 D 6.8 50 105 34 10 120 3 1400 1000 600 – 3
TCJD106M050#0120 D 10 50 105 50 10 120 3 1400 1000 600 – 3
TCJE106M050#0070 E 10 50 105 50 6 70 3 1900 1300 900 – 3
TCJE106M050#0100 E 10 50 105 50 6 100 3 1600 1100 700 – 3
TCJE156M050#0070 E 15 50 105 75 6 70 3 1900 1300 900 – 3
TCJE156M050#0100 E 15 50 105 75 6 100 3 1600 1100 700 – 3
63 Volt @ 85°C
TCJB474M063#0400 B 0.47 63 105 3 8 400 3 600 400 300 – 3
TCJB684M063#0300 B 0.68 63 105 4.3 8 300 3 600 400 300 – 3
TCJB105M063#0300 B 1.0 63 105 6.3 8 300 3 600 400 300 – 3
TCJC105M063#0300 C 1.0 63 105 6.3 6 300 3 800 600 400 – 3
TCJC155M063#0300 C 1.5 63 105 9.5 6 300 3 800 600 400 – 3
TCJC225M063#0200 C 2.2 63 105 13.9 6 200 3 900 600 400 – 3
TCJC335M063#0200 C 3.3 63 105 20.8 6 200 3 900 600 400 – 3
TCJC475M063#0200 C 4.7 63 105 29.6 6 200 3 900 600 400 – 3
TCJD475M063#0120 D 4.7 63 105 29.6 6 120 3 1400 1000 600 – 3
TCJD685M063#0120 D 6.8 63 105 42.8 6 120 3 1400 1000 600 – 3
TCJE685M063#0100 E 6.8 63 105 42.8 6 100 3 1600 1100 700 – 3
TCJE685M063#0150 E 6.8 63 105 42.8 6 150 3 1300 900 600 – 3
TCJE106M063#0100 E 10 63 105 63 6 100 3 1600 1100 700 – 3
TCJE106M063#0150 E 10 63 105 63 6 150 3 1300 900 600 – 3
75 Volt @ 85°C
TCJD475M075#0150 D 4.7 75 105 35.3 6 150 3 1200 800 500 – 3
TCJD685M075#0120 D 6.8 75 105 51 6 120 3 1400 1000 600 – 3
100 Volt @ 85°C
TCJD475M100#0250 D 4.7 100 105 47 8 250 3 900 600 400 – 4
125 Volt @ 85°C
TCJD335M125#0250 D 3.3 125 105 41.2 8 250 3 900 600 400 – 4
114
022717
TCJ Series
Conductive Polymer Solid Electrolytic Chip Capacitors
PRODUCT CATEGORY 1 (TEMPERATURE RANGE -55°C TO +125°C)
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 2 x initial limit
Storage Life 125ºC, 0V, 2000h ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 3 x initial limit
Humidity ΔC/C within +30/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
Temperature DCL
IL* n/a IL* 10 x IL* 12.5 x IL* IL*
Stability ΔC/C
n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 10V
within +20/-30% of initial value for Vr ≥ 16V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
room temperature. Also determine after application of
125ºC temperature, 2/3 rated voltage for 2000 +48/-0
hours and then leaving 1-2 hours at room temperature.
Power supply impedance to be ≤ 0.1Ω/V.
Determine after storage without applied voltage at
65±2ºC and 95±2% relative humidity for 500hrs
and then recovery 1-2hours at room temperature.
Test temperature: 125ºC+3/0ºC
Surge voltage: 1.3x 2/3x rated voltage at 125ºC
Charge/Discharge resistance: 1000Ω±100Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +125+3/-0 15
6 +20±2 15
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
RECOMMENDED DERATING FACTOR
Voltage and temperature derating as percentage of Vr
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55ºC 85ºC 105ºC
Rated Voltage
Product Category 2
Recommended Application
Voltage for Vr ≤ 10V
Recommended Application
Voltage for Vr ≥ 16V
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55ºC 85ºC 125ºC
67%
60%
54%
Product Category 1
Rated Voltage
Recommended Application
Voltage for Vr ≤ 10V
Recommended Application
Voltage for Vr ≥ 16V
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55ºC 85ºC
Rated Voltage
Product Category 5
Recommended Application
Voltage for Vr ≤ 10V
Recommended Application
Voltage for Vr ≥16V
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55ºC 85ºC 105ºC
Product Category 3, 4
Rated Voltage
Recommended Application
Voltage for Vr ≤ 10V
Recommended Application
Voltage for Vr ≥ 16V
80%
72%
64%
115
022717
PRODUCT CATEGORY 2, 3, 4 (TEMPERATURE RANGE -55°C TO +105°C)
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL (V
R
≤ 75V) 1.25 x initial limit
DCL (V
R
> 75V) 2 x initial limit
Storage Life 105ºC, 0V, 2000h ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 3 x initial limit
Humidity ΔC/C within +30/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
Temperature DCL
IL* n/a IL* 10 x IL* 12.5 x IL* IL*
Stability ΔC/C
n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 10V
within +20/-30% of initial value for Vr ≥ 16V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/- 0 hours at 85±2ºC and then leaving 1-2 hours
at room temperature. Also determine after application
of 105ºC temperature. For CATEGORY 2: Rated volt-
age for 2000 +48/-0 hours. For CATEGORY 3, 4:
0.8x rated voltage for 2000 +48/-0 hours And then
leaving 1-2 hours at room temperature. Power supply
impedance to be ≤ 0.1Ω/V.
Determine after storage without applied
voltage at 65±2ºC and 95±2% relative
humidity for 500hrs and then recovery
1-2 hours at room temperature.
Test temperature: 105ºC +3/0ºC
For CATEGORY 2:
Surge voltage: 1.3x rated voltage at 105ºC
For CATEGORY 3, 4:
Surge voltage: 1.3x 0.8x rated voltage at 105ºC
Charge/Discharge resistance: 1000±100Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +105+3/-0 15
6 +20±2 15
TCJ Series
Conductive Polymer Solid Electrolytic Chip Capacitors
PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C)
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 1.25 x initial limit
Storage Life
85ºC, 0V, 2000h
ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 5 x initial limit
Humidity ΔC/C within +40/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +20ºC
Temperature DCL IL* n/a IL* 10 x IL* IL*
Stability ΔC/C n/a +0/-20% ±5% +20/-0% ±5%
DF IL* 1.5 x IL* IL* 1.5 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 10V
within +20/-30% of initial value for Vr ≥ 16V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
room temperature. Power supply impedance to be
≤ 0.1Ω/V.
Determine after storage without applied voltage at
65±2ºC and 95±2% relative humidity for 500hrs
and then recovery 1-2hours at room temperature.
Test temperature: 85ºC+3/0ºC
Surge voltage: 1.3 x rated voltage
Charge/Discharge resistance: 1000±100Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +20±2 15
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
P1-P3P4-P6P7-P9

TCJC106M035R0200

Mfr. #:
Buy TCJC106M035R0200
Manufacturer:
N/A
Description:
Tantalum Capacitors - Polymer SMD 35volts 10uF 20% ESR=200mOhms
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet