• 22 tracking /66 acquisition channels
•GPS L1 C/A code
• Sensitivity
Tracking: -165 dBm
Cold starts : -148 dBm
• Time-To-First-Fix
Cold starts: 32s (typ.)
Hot starts: 1s (typ.)
Warm starts: 5s (typ.)
• Accuracy: approx 2.5 meters
Sounds delicious, right? So we plated this fine module onto a shield with all the
extras you need to make your next project shine
• Onboard LiPoly battery charging circuitry so you can take your project on the
go.Use any 500mAh+ LiPoly or LiIon batteryand recharge via the Arduino when
necessary. Two LEDs let you know when its charging and done. You can then flip
the switch and use the battery to run your circuit!
• Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-
compatible headset with mic
• Breakouts for external 32Ω speaker andelectret micif you don't want to use a
headphone
• Level shifting circuitry to make it Arduino-safe
• Vibrational motor (buzzer)driver so you can have noiseless notifications
• uFL connection forexternal passive GPS&external GSM antenna
• Indicator LEDs for power and network connectivity
• Any standard 2G SIM slides into a secure connector
On its own, this shield can't do anything. It requires a microcontroller like an
Arduino to drive it! You will also need some required accessories to make FONA
work.These are not included!
•SIM Card!A 2G Mini SIM card is required to do anything on the cellular
network. US AT&T no longer sells 2G SIMs and will shut off their 2G network,
sofor American customers we recommend any T-Mobile or reseller (TING, SIMPLE
mobile, etc) that uses the T-Mobile network.
• Lipoly Battery- 500mAh or larger! This500mAhbattery,or this 1200mAhwill
work great.
• External GSM Antenna- This slim uFL antenna works great!
• External Passive GPS Antenna - This 15mm passive antenna works great!
Page 3 of 4