https://www.phoenixcontact.com/pi/products/1437164
08/21/2018Page1/5
Flush-type connector-SACC-CI-M12MS-4CON-L180 THR-1437164
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type plug, 4-pos., A-coded, with straight THR solder connection, only contact insert
Why buy this product
Reduced mounting costs thanks to two-piece device connector
Packaging available for automated pick and place assembly
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Additional gasket for the device when not plugged in
Key Commercial Data
Packing unit 60 STK
Minimum order quantity 60 STK
GTIN
GTIN 4046356457118
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67 (correctly plugged in and locked)
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 4 A
Rated voltage 250 V