TMV 2403SHI

http://www.tracopower.com Page 1 of 3
DC/DC Converters
TMV-HI Series, 1 Watt
Features
Ultra compact SIP-7 package
Very high I/O-isolation 5‘200 VDC
Dedicated for IGBT applications
Operating temperature range
-40°C to +95°C
Industry standard pinout
3-year product warranty
The TMV-HI series is a range of 1 Watt non regulated DC/DC-converters with very
high I/O-isolation. They come in a very compact SIP-7 package.
Order code Input voltage Output voltage Output current max. Efficiency typ.
TMV 0503SHI
3.3 VDC 303 mA 70 %
TMV 0505SHI
5.0 VDC 200 mA 70 %
TMV 0509SHI
9.0 VDC 111 mA 75 %
TMV 0512SHI
12 VDC 84 mA 77 %
TMV 0515SHI
5 VDC ±10 %
15 VDC 66 mA 78 %
TMV 0505DHI
±5.0 VDC ±100 mA 71 %
TMV 0509DHI
±9.0 VDC ±56 mA 75 %
TMV 0512DHI
±12 VDC ±42 mA 77 %
TMV 0515DHI
±15 VDC ±33 mA 78 %
TMV 05159HI
+15 / –9 VDC +33 / –55 mA 76 %
TMV 1203SHI
3.3 VDC 303 mA 71 %
TMV 1205SHI
5.0 VDC 200 mA 71 %
TMV 1209SHI
9.0 VDC 111 mA 76 %
TMV 1212SHI
12 VDC 84 mA 78 %
TMV 1215SHI 12 VDC ±10 %
15 VDC 66 mA 79 %
TMV 1205DHI
±5.0 VDC ±100 mA 72 %
TMV 1209DHI
±9.0 VDC ±56 mA 76 %
TMV 1212DHI
±12 VDC ±42 mA 78 %
TMV 1215DHI
±15 VDC ±33 mA 79 %
TMV 12159HI
+15 / –9 VDC +33 / –55 mA 77 %
TMV 1503SHI
3.3 VDC 303 mA 70 %
TMV 1505SHI
5.0 VDC 200 mA 70 %
TMV 1509SHI
9.0 VDC 111 mA 75 %
TMV 1512SHI
12 VDC 84 mA 75 %
TMV 1515SHI 15 VDC ±10 %
15 VDC 66 mA 79 %
TMV 1505DHI
±5.0 VDC ±100 mA 71 %
TMV 1509DHI
±9.0 VDC ±56 mA 75 %
TMV 1512DHI
±12 VDC ±42 mA 78 %
TMV 1515DHI
±15 VDC ±33 mA 79 %
TMV 15159HI
+15 / –9 VDC +33 / –55 mA 76 %
TMV 2403SHI
3.3 VDC 303 mA 70 %
TMV 2405SHI
5.0 VDC 200 mA 70 %
TMV 2409SHI
9.0 VDC 111 mA 75 %
TMV 2412SHI
12 VDC 84 mA 78 %
TMV 2415SHI 24 VDC ±10 %
15 VDC 66 mA 80 %
TMV 2405DHI
±5.0 VDC ±100 mA 71 %
TMV 2409DHI
±9.0 VDC ±56 mA 75 %
TMV 2412DHI
±12 VDC ±42 mA 77 %
TMV 2415DHI
±15 VDC ±33 mA 78 %
TMV 24159HI
+15 / –9 VDC +33 / –55 mA 75 %
Models
C B
Scheme
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TMV-HI Series 1 Watt
Input Specifications
Input current no load 5 Vin models: 35 mA typ.
12 Vin models: 17 mA typ.
15 Vin models: 16 mA typ.
24 Vin models: 12 mA typ.
Surge voltage (1 s max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
15 Vin models: 20 V max.
24 Vin models: 30 V max.
Input filter internal capacitor
Internal power dissipation 450 mW max.
Recommended input fuse (slow blow) 5 Vin models: 500 mA
12 Vin models: 200 mA
15 Vin models: 150 mA
24 Vin models: 100 mA
Output Specifications
Voltage set accuracy ±5 % max.
Voltage balance (dual output models, balanced loads) 0.1% typ. / 1 % max.
Regulation – Input variation (1 % change Vin) 1.2 % typ.
– Load variation (20 – 100 %) 3.3 VDC models: <20 %
5 VDC models: <15 %
other models: <10 %
Ripple and noise (20 MHz Bandwidth) 100 mVp-p max.
Temperature coefficient ±0.01 %/K typ. / ±0.02 %/K max.
Short circuit protection continuous, automatic recovery
Capacitive load –Single output 3.3 VDC models: 1000 µF max.
5.0 & 9.0 VDC models: 470 µF max.
12 & 15 VDC models: 220 µF max.
–Dual output ±5.0 & ±9.0 VDC models: 220 µF max. (each output)
±12 & ±15 VDC models: 100 µF max. (each output)
+15 / –9 VDC models: 100 / 220 µF max.
Isolation /Safety
Isolation voltage – Isolation test voltage (tested for 1 s) 5‘700 Vpk
– I/O isolation voltage (60 s) 5’200 VDC
Isolation capacitance (input/output) 7 pF typ.
Isolation resistance (input/output) >10 Gohm
Common mode transient immunity (dv/dt) 15 kV/µs min.
General Specifications
Temperature ranges – Operating (natural convection) –40°C to +95°C
– Case temperature +100°C max.
Power derating 6.7 %/K above +85°C
Humidity (non condensing) 95 % rel H max.
Altitude during operation 4000 m
Switching frequency 100 kHz typ. (frequency modulation)
Safety standards CAN/CSA-C22.2 No 60950-1-07, 2nd ed; A1:2011
ANSI/UL No. 60950-1, 2nd ed.; A1:2011
IEC 60950-1:2005 (2nd edition); Am 1:2009
EN 60950-1:2006/A11:2009/A1:2010/A12:2011
Certification documents www.tracopower.com/overview/tmv-hi
Environmental compliance Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS RoHS directive 2011/65/EU
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TMV-HI Series 1 Watt
Physical Specifications
Casing material non-conducting FR4 (UL 94V-0 rated)
Package weight 2.4 g (0.084 oz)
Soldering temperature max. 260°C / 10 s
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2’000’000 h
Outline Dimensions
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
5
–Vout –Vout
6
No pin Common
7
+Vout +Vout
Pin-Out
Dimensions in [mm], () = Inch
Tolerances ±0.25 (±0.01)
pins ±0.05 (±0.002)
Rev. December 20. 2017
Bottom view
1 2 65 7
1.55
2.54
0.5
2.3
±0.4
2.54
19.5
(0.77)
7.62
(0.3)
2.54
0.5
(0.02)
10.2
(0.4)
3.2
(0.13)
(0.02)
0.5
(0.02)
(0.1)
(0.1) (0.1)
(0.09
±0.02
)
7. 5
(0.30)
(0.06)
0.5
(0.02)
0.25
(0.01)

TMV 2403SHI

Mfr. #:
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union