© 2018 Kingbright. All Rights Reserved. Spec No: DSAP1402 / 1203015078 Rev No: V.3B Date: 02/24/2018
Page 1 / 4
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
APGF0606VGTPBTSEETC
0.65 x 0.65 x 0.2 mm Full-Color Surface Mount LED
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
DESCRIPTIONS
The Green source color devices are made with InGaN
on SiC substrate Light Emitting Diode
The Blue source color devices are made with InGaN
on SiC substrate Light Emitting Diode
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
Damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
0.65 mm x 0.65mm SMD LED, 0.2 mm thickness
Low power consumption
Can produce any color in visible spectrum
Package: 4000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Part Number
Emitting Color
(Material)
Lens Type
Iv (mcd) @ 5mA
[2]
Viewing Angle
[1]
Min. Typ. 2θ1/2
APGF0606VGTPBTSEETC
■ Green (InGaN)
Water Clear
30 90
■ Blue (InGaN)
5 20
■ Hyper Red
(AlGaInP)
15 25
140
°