Data Sheet ADuM3151/ADuM3152/ADuM3153
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 18.
Parameter Rating
Storage Temperature (T
ST
) Range −65°C to +150°C
Ambient Operating Temperature (T
A
)
Range
−40°C to +125°C
Supply Voltages (V
DD1
, V
DD2
) −0.5 V to +7.0 V
Input Voltages (V
IA
, V
IB
, V
IC
, MCLK,
MO,
MSS)
−0.5 V to V
DDx
+ 0.5 V
Output Voltages (SCLK, SSS, MI, SI,
V
OA
, V
OB
, V
OC
)
−0.5 V to V
DDx
+ 0.5 V
Average Current per Output Pin
1
−10 mA to +10 mA
Common-Mode Transients
2
−100 kV/µs to +100 kV/µs
1
See Figure 4 for maximum safety rated current values across temperature.
2
Refers to common-mode transients across the insulation barrier. Common-
mode transients exceeding the absolute maximum ratings may cause latch-up
or permanent damage.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Table 19. Maximum Continuous Working Voltage
1
Parameter Max Unit Constraint
AC 60 Hz RMS
Voltage
400 V rms
20-year lifetime at 0.1%
failure rate, zero average
voltage
DC Voltage 722 V peak
Limited by the creepage of
the package,
Pollution Degree 2,
Material Group II
2, 3
1
See the Insulation Lifetime section for more details.
2
Other pollution degree and material group requirements yield a different limit.
3
Some system level standards allow components to use the printed wiring
board (PWB) creepage values. The supported dc voltage may be higher for
those standards.
ESD CAUTION
Rev. A | Page 13 of 22