OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EEU-TA1H3R3B

P1-P3
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-94 –
φ8
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
✽L
(φ16҂15, φ18҂15:L±1.5)
✽ L<16:L±1.0
L>20:L±2.0
Pressure relief
+
–
φ10<
φD±0.5
Radial Lead Type
Series:
TA
Type:
A
■ Di men sions in mm (not to scale)
Body Dia.
φ
D81012.51618
Lead Dia.
φ
d0.60.60.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
■ Features
●
Endurance: 125 °C 2000 h
●
Heat cycle: 1000 cycle –40 °C to +125 °C
●
RoHS directive compliant
■ Specifi cations
Category Temp. Range –40 °C to + 125 °C
Rated W.V. Range 10 V .DC to 63 V .DC
Nominal Cap. Range 1 µF to 4700 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan
δ
W.V.(V) 10 16 25 35 50 63
(120Hz / +20 °C)
tan
δ
0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value
>
1000 µF , add 0.02 per every 1000 µF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.
Capacitance change ±30% of initial measured value
tan
δ
<
300 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.
(V.DC)
Cap. (µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 63
1 to 330 0.55 0.65 0.85 0.90 1.00
470 to 1000 0.70 0.75 0.90 0.95 1.00
2200 to 4700 0.75 0.80 0.90 0.95 1.00
■ Frequency correction factor for ripple current
(Unit : mm)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-95 –
■ Standard Prod ucts
W.V.
Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽
B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(
액
)(mm)(mm) (mm) (pcs) (pcs)
10
330 8 11.5 500 0.130 0.6 3.5 5.0
EEUTA1A331( )
200 1000
470 10 12.5 680 0.100 0.6 5.0 5.0
EEUTA1A471( )
200 500
1000
10 20 1100 0.057 0.6 5.0 5.0
EEUTA1A102 ( )
200 500
12.5 15 1085 0.070 0.6 5.0 5.0
EEUTA1A102S ( )
200 500
2200
12.5 25 1750 0.033 0.6 5.0 5.0
EEUTA1A222L( )
200 500
16 20 1985 0.032 0.8 7.5 7.5
EEUTA1A222( )
100 250
18 15 1800 0.042 0.8 7.5 7.5
EEUTA1A222S( )
100 250
3300
16 25 2300 0.024 0.8 7.5 7.5
EEUTA1A332( )
100 250
18 20 2250 0.031 0.8 7.5 7.5
EEUTA1A332S( )
100 250
4700
16 31.5 2710 0.020 0.8 7.5
EEUTA1A472
100
18 25 2470 0.022 0.8 7.5 7.5
EEUTA1A472S( )
100 250
16
220 8 11.5 500 0.130 0.6 3.5 5.0
EEUTA1C221( )
200 1000
330 10 12.5 680 0.100 0.6 5.0 5.0
EEUTA1C331( )
200 500
470 10 16 945 0.075 0.6 5.0 5.0
EEUTA1C471( )
200 500
1000
12.5 20 1490 0.042 0.6 5.0 5.0
EEUTA1C102( )
200 500
16 15 1520 0.047 0.8 7.5 7.5
EEUTA1C102S( )
100 250
2200
16 25 2300 0.024 0.8 7.5 7.5
EEUTA1C222( )
100 250
18 20 2250 0.031 0.8 7.5 7.5
EEUTA1C222S( )
100 250
3300
16 31.5 2710 0.020 0.8 7.5
EEUTA1C332
100
18 25 2470 0.022 0.8 7.5 7.5
EEUTA1C332S( )
100 250
4700 18 31.5 3270 0.018 0.8 7.5
EEUTA1C472
50
25
100 8 11.5 500 0.130 0.6 3.5 5.0
EEUTA1E101( )
200 1000
220 10 12.5 680 0.100 0.6 5.0 5.0
EEUTA1E221( )
200 500
330 10 16 945 0.075 0.6 5.0 5.0
EEUTA1E331( )
200 500
470
10 20 1100 0.057 0.6 5.0 5.0
EEUTA1E471( )
200 500
12.5 15 1085 0.070 0.6 5.0 5.0
EEUTA1E471S( )
200 500
1000
12.5 25 1750 0.033 0.6 5.0 5.0
EEUTA1E102L( )
200 500
16 20 1985 0.032
0.8 7.5 7.5
EEUTA1E102( )
100 250
18 15 1800 0.042 0.8 7.5 7.5
EEUTA1E102S( )
100 250
2200
16 31.5 2710 0.020 0.8 7.5
EEUTA1E222
100
18 25 2470 0.022 0.8 7.5 7.5
EEUTA1E222S( )
100 250
3300 18 35.5 3310 0.017 0.8 7.5
EEUTA1E332
50
35
100 10 12.5 555 0.180 0.6 5.0 5.0
EEUTA1V101( )
200 500
220 10 16 765 0.130 0.6 5.0 5.0
EEUTA1V221( )
200 500
330 10 20 930 0.100 0.6 5.0 5.0
EEUTA1V331( )
200 500
470
12.5 20 1330 0.070 0.6 5.0 5.0
EEUTA1V471( )
200 500
16 15 1450 0.088 0.8 7.5 7.5
EEUTA1V471S( )
100 250
1000
16 25 2010 0.037 0.8 7.5 7.5
EEUTA1V102( )
100 250
18 20 2180 0.046 0.8 7.5 7.5
EEUTA1V102S( )
100 250
2200 18 35.5 2790 0.025 0.8 7.5
EEUTA1V222
50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 125 °C 2000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-96 –
■ Standard Prod ucts
W.V.
Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽
B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(
액
)(mm)(mm) (mm) (pcs) (pcs)
50
1 8 11.5 352.00 0.6 3.5 5.0
EEUTA1H1R0( )
200 1000
2.2 8 11.5501.800.63.55.0
EEUTA1H2R2( )
200 1000
3.3 8 11.5 60 1.50 0.6 3.5 5.0
EEUTA1H3R3( )
200 1000
4.7 8 11.5 85 1.15 0.6 3.5 5.0
EEUTA1H4R7( )
200 1000
10 8 11.5 180 0.950 0.6 3.5 5.0
EEUTA1H100( )
200 1000
22 8 11.5 250 0.650 0.6 3.5 5.0
EEUTA1H220( )
200 1000
33 8 11.5 300 0.450 0.6 3.5 5.0
EEUTA1H330( )
200 1000
47 8 11.5 440 0.350 0.6 3.5 5.0
EEUTA1H470S( )
200 1000
100 10 12.5 555 0.180 0.6 5.0 5.0
EEUTA1H101( )
200 500
220 10 20 930 0.100 0.6 5.0 5.0
EEUTA1H221( )
200 500
330
12.5 20 1330 0.070 0.6 5.0 5.0
EEUTA1H331( )
200 500
16 15 1450 0.088 0.8 7.5 7.5
EEUTA1H331S( )
100 250
470
12.5 25 1650 0.055 0.6 5.0 5.0
EEUTA1H471L( )
200 500
16 20 1650 0.053 0.8 7.5 7.5
EEUTA1H471( )
100 250
18 15 1710 0.075 0.8 7.5 7.5
EEUTA1H471S( )
100 250
1000
16 31.5 2430 0.031 0.8 7.5
EEUTA1H102
100
18 25 2350 0.032 0.8 7.5 7.5
EEUTA1H102S( )
100 250
63
22 8 11.5 310 0.470 0.6 3.5 5.0
EEUTA1J220( )
200 1000
33 10 12.5 410 0.360 0.6 5.0 5.0
EEUTA1J330( )
200 500
47 10 16 460 0.270 0.6 5.0 5.0
EEUTA1J470( )
200 500
100 10 20 680 0.205 0.6 5.0 5.0
EEUTA1J101( )
200 500
220
12.5 25 1325 0.100 0.6 5.0 5.0
EEUTA1J221L( )
200 500
16 20 1360 0.085 0.8 7.5 7.5
EEUTA1J221( )
100 250
18 15 1300 0.120 0.8 7.5 7.5
EEUTA1J221S( )
100 250
330
16 25 1660 0.070 0.8 7.5 7.5
EEUTA1J331( )
100 250
18 20 1760 0.077 0.8 7.5 7.5
EEUTA1J331S( )
100 250
470
16 31.5 2055 0.060 0.8 7.5
EEUTA1J471
100
18 25 1990 0.060
0.8 7.5 7.5
EEUTA1J471S( )
100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 125 °C 2000 h
00 Nov. 2012
P1-P3

EEU-TA1H3R3B

Mfr. #:
Buy EEU-TA1H3R3B
Manufacturer:
Panasonic
Description:
Aluminum Electrolytic Capacitors - Radial Leaded Al Lytic Cap 125C Radial TA Series
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet