RACV30
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
30 Watt PFC
Single CV
Output
Selection Guide
Input Voltage Range 90-264VAC or 140-370VDC
Input Frequency Range 47-63Hz
Input Current Full Load < 380mA
Power Factor Correction Full Load >0.92
THD Full Load, 115VAC 12% max.
Inrush Current (2ms peak) 30A max.
Input Fuse internal 2A/250V
Output Voltage Accuracy (Output Load min <-> max) ±5%
Load Regulation (Output Load min <-> max) 2% max.
Line Regulation (VACin min <-> VACin max) 2% max.
Output Ripple 3% max.
Operating Frequency ≤125kHz
Isolation Voltage 3kVAC / 1 minute
Operating Temperature Range Ambient Temperature -20°C to +50°C
(free air convection) Case Temperature 75°C max.
Humidity 85% RH max.
Case Material Epoxy UL94V-0
Weight RACV30-24 167g
RACV30-12 170g
MTBF MIL STD 217F 30x10³ hours
Design Lifetime 70 x 10³ hours max.
EMC Standards EN55015
FCC18A
Certifications
LED General Safety UL8750, cUL8750
ENEC EN61347-2-13:2006
EN61347-1:2008
PSE J61347-1(H20), J61347-2-13(H21), J55015(H20)
Screw Terminal Specification 14AWG or 2.5mm²
Connector Plug Specification 5.5mm connector
Short Circuit Protection Current Limit, Automatic Restart
Overload Protection Full Load 110~160%
Overtemperature Protection Tj=110°C Automatic Restart
Specifications (typical at 25°C, nominal input voltage and full load)
● Constant Voltage Output
● ENEC, UL, RCM and CB Certified
● Power Factor Corrected
● Short Circuit, Overload and Overtemperature
Protected
Features
LED DRIVER
Part Input Voltage Output Output Current Efficiency
Number Range Voltage Range typ.
(VAC) (VDC) (mA) (%)
RACV30-24 90-264 24 0-1250 84
RACV30-12 90-264 12 0-2500 83
EN61347-2-13 Certified
UL-8750 Certified
cUL-8750 Certified
E340696
RoHS
2011/65/EU
6/6
Note:
All LED Drivers may not be used without a load.
They must be switched on the primary side only.
Noncompliance may damage the LED or reduce
its lifetime.
Refer to Application Notes
Description
The RACV30 is the first of a new series of constant voltage LED drivers, ideal for powering LED strips and LED
modules in applications such as cove lighting, signage, back lighting, channel letters, displays or under cabinet lighting.
The input voltage range of 90 to 264VAC assures full functionality worldwide. The new drivers provide up to 30 watts
and are available with outputs of 12VDC or 24VDC. The output voltages are closely regulated to compensate for
varying loads or supply changes (2% max.)
L-44 www.recom-power.comREV: 0/2015
