IHM2PM101K

Document Number: 34017 For technical questions, contact: magnetics@vishay.com
www.vishay.com
Revision: 04-Feb-11 1
Filter Inductors, High Current, Radial Leaded
IHM-2
Vishay Dale
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with no DC current
Current Rating: Maximum continuous operating current
based on 50 °C temperature rise
Dielectric Rating: 1500 V
RMS
between windings and top of
component
Operating Temperature: - 55 °C to + 125 °C (no load),
- 55 °C to + 75 °C (at full rated current)
FEATURES
Totally encapsulated using a potted flame-
resistant shell
Pre-tinned leads
Printed circuit mounting
Compliant to RoHS Directive 2002/95/EC
MECHANICAL SPECIFICATIONS
Terminals: 18 AWG tinned copper
Core Material: Ferrite
Encapsulant: Flame-resistant shell potted with epoxy
DIMENSIONS in inches [millimeters]
STANDARD ELECTRICAL SPECIFICATIONS
IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA)
1.0 ± 10 0.005 17 800
1.2 ± 10 0.005 17 000
1.5 ± 10 0.006 16 200
1.8 ± 10 0.006 15 600
2.2 ± 10 0.007 15 000
2.7 ± 10 0.008 14 500
3.3 ± 10 0.008 14 000
3.9 ± 10 0.009 13 500
4.7 ± 10 0.010 13 000
5.6 ± 10 0.011 12 750
6.8 ± 10 0.012 12 500
8.2 ± 10 0.013 11 250
10.0 ± 10 0.014 10 000
12.0 ± 10 0.016 9250
15.0 ± 10 0.022 8500
18.0 ± 10 0.024 7500
22.0 ± 10 0.033 6500
27.0 ± 10 0.037 6000
33.0 ± 10 0.051 5500
39.0 ± 10 0.056 5000
47.0 ± 10 0.076 4500
56.0 ± 10 0.084 4250
68.0 ± 10 0.093 4000
82.0 ± 10 0.103 3650
100.0 ± 10 0.140 3300
120.0 ± 10 0.175 3000
150.0 ± 10 0.210 2700
180.0 ± 10 0.241 2450
220.0 ± 10 0.330 2200
270.0 ± 10 0.420 1950
330.0 ± 10 0.510 1700
390.0 ± 10 0.561 1650
470.0 ± 10 0.610 1600
560.0 ± 10 0.687 1450
680.0 ± 10 0.910 1300
820.0 ± 10 1.030 1150
#18 AWG
1.0 ± 0.015
[25.40 ± 0.381]
0.560 [14.22]
Max.
0.020 [0.508]
Min. Typ.
0.250 ± 0.015
[6.35 ± 0.381]
0.500 ± 0.015
[12.70 ± 0.381]
0.250 ± 0.010
[6.35 ± 0.254]
0.040 ± 0.001
[1.02 ± 0.025]
Dia.
0.150 [3.81]
0.125 [3.18]
0.500 ± 0.015
[12.70 ± 0.381]
www.vishay.com For technical questions, contact: magnetics@vishay.com
Document Number: 34017
2 Revision: 04-Feb-11
IHM-2
Vishay Dale
Filter Inductors, High Current, Radial Leaded
1000.0 ± 10 1.400 1000
1200.0 ± 10 1.570 920
1500.0 ± 10 2.200 840
1800.0 ± 10 2.420 770
2200.0 ± 10 3.300 690
2700.0 ± 10 3.720 620
3300.0 ± 10 5.100 550
3900.0 ± 10 5.580 500
4700.0 ± 10 7.700 450
5600.0 ± 10 8.320 410
6800.0 ± 10 11.700 360
8200.0 ± 10 12.800 350
10 000.0 ± 10 14.200 330
12 000.0 ± 10 15.700 300
15 000.0 ± 10 21.900 260
MARKING
- Vishay Dale
- Model
- Value
- Date code
ORDERING INFORMATION
IHM-2 10 μH ± 10 % EB E3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IHM2 EB 100 K
MODEL PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
STANDARD ELECTRICAL SPECIFICATIONS
IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA)
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

IHM2PM101K

Mfr. #:
Manufacturer:
Vishay / Dale
Description:
Ind High Current Filter 100uH 10% Ferrite 3.3A Radial Bulk - Bulk (Alt: IHM2PM101K)
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union