DATA SHEET APD SERIES: SILICON PIN DIODE BONDABLE CHIPS
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
2 September 8, 2014 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200075S
Table 1. APD Series Absolute Maximum Ratings
Parameter Symbol Minimum Typical Maximum Units
Power dissipation PDIS
casetojunction
J
cetansisReThermal
TempCaseTMaximum
W
Reverse voltage VR See Voltage Rating column in Table 2 V
Forward current IF 200 mA
Operating temperature TOP –65 +175 C
Storage temperature TSTG –65 +200 C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. APD Series Electrical Specifications (Note 1)
(TOP = +25 C, Unless Otherwise Noted)
Parameter
Junction
Capacitance
(C
J)
V
R = 50 V,
1 MHz
(pF)
Junction
Capacitance
(C
J)
V
R = 0 V,
1 MHz
(pF)
Series
Resistance (R
S),
I = 10 mA,
500 MHz
(Ω)
Minority Carrier
Lifetime (T
L)
I = 10 mA
(ns)
Voltage
Rating
(Note 2)
(V)
I-Region
Thickness
(μm)
Thermal
Resistance
(θ
JC)
(C/W)
Maximum Typical Maximum Typical Nominal Maximum
Switching Applications
APD0505-000 0.05 0.10 2.5 70 50 5 118
APD0510-000 0.10 0.20 1.5 90 50 5 76
APD0520-000 0.20 0.25 1.0 120 50 5 55
APD0805-000 0.05 0.10 2.0 100 100 8 87
APD0810-000 0.10 0.15 1.5 160 100 8 60
APD1505-000 0.06 @ 10 V 0.12 2.5 350 200 15 60
APD1510-000 0.10 0.20 2.0 300 200 15 56
APD1520-000 0.20 0.25 1.2 900 200 15 44
Attenuator Applications
APD2220-000 0.20 0.35 4.0 700 100 50 18
Note 1: Performance is guaranteed only under the conditions listed in this table.
Note 2: Reverse current is specified at 10 μA maximum at the voltage rating noted. Do not exceed this voltage.