51S170-C10S3

Technical Data Sheet
BNC
50
Calibration Load
Plug
51S170-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-1499
Email : info@rosenberger.de
Page
1 / 3
RF_35/05.10/6.0
Dieses Dokument ist urheberrechtlich geschützt
This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
According to IEC 60169-8, MIL-PRF-39012, CECC 22120
Documents
Application note AN001 “Calibration Services”
Material and plating
Connector parts Material Plating
Center conductor CuBe Gold, min. 1.27 µm, over nickel
Outer conductor Stainless steel Passivated
Dielectric PTFE, PPE
Substrate Al
2
O
3
Technical Data Sheet
BNC
50
Calibration Load
Plug
51S170-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-1499
Email : info@rosenberger.de
Page
2 / 3
RF_35/05.10/6.0
Dieses Dokument ist urheberrechtlich geschützt
This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG
Electrical data
Frequency range DC to 4 GHz
Return loss 34 dB, DC to 2 GHz
30 dB, 2 GHz to 4 GHz
Power handling
0.5 W
Mechanical data
Mating cycles 500
Gauge 5.31 mm to 5.38 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z
o
/ Impedance / Z
o
50
Offset Delay 0.0000 ps
Length (electrical) / Offset Length 0.000 mm
Offset Loss 0.00 G/s
Loss 0.0000 dB/
GHz
Environmental data
Operating temperature range
1
+20 °C to +26 °C
Rated temperature range of use
2
0 °C to +50 °C
Storage temperature range -40 °C to +85 °C
RoHS compliant
1
Temperature range over which these specifications are valid.
2
This range is underneath and above the operating temperature range, within the open circuit is fully functional
and could be used without damage.
Technical Data Sheet
BNC
50
Calibration Load
Plug
51S170-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-1499
Email : info@rosenberger.de
Page
3 / 3
RF_35/05.10/6.0
Dieses Dokument ist urheberrechtlich geschützt
This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG
Declaration of calibration options
Factory Calibration
Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate
issued reports individual calibration results, traceable to Rosenberger standards, national / international
standards are not available. Model based standard definitions are reported in an Agilent/Keysight, Rohde &
Schwarz and Anritsu compatible VNA format.
Accredited Calibration
Not available.
For further, more detailed information see application note AN001 on the Rosenberger homepage.
Calibration interval
Recommendation 12 months
Packing
Standard 1 pce in box
Weight 47 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Herbert Babinger 28.01.05 Martin Moder 09.07.15 f00 14-1492 Manfred Ruf 09.07.15
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr
anty on
our part and no statement herein shall be construed as recommendation to infringe existing
patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.

51S170-C10S3

Mfr. #:
Manufacturer:
Rosenberger
Description:
RF Connectors / Coaxial Connectors calibration load
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet