OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EEV-TG1V471UQ

P1-P3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
100
TGA
Capacitance (µF)
Rated Voltage code
Series identification
Mark for Lead-Free
products
(Black dot)
Lot number
Negative polarity
marking (–)
1000
TGA
Capacitance (µF)
Rated Voltage code
Series identification
Lot number
Negative polarity
marking (–)
●
Endurance : 125 °C 1000 h to 2000 h
●
Miniaturization (40 % less than TA Series)
●
Low ESR (Low temp)
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽)
Features
Speci cations
Surface Mount Type
Series : TG Type : V
Category temperature range
–40 °C to +125 °C
Rated voltage range 10 V.DC to 100 V.DC
Capacitance range 10 µF to 4700 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 32222222
Z(–40 °C)/Z(+20 °C) 64433333
Endurance
After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2 <) at +125 °C±2 °C
and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
tan d
< 300 % of the initial limit (code U : ±350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 10 V.DC 100 µF, 10 V.DC 1000 µF
Marking color : BLACK
Lead-Free products (< 010)
Lead-Free products (> 012.5)
Size
code
0D
L A, B H I W P K
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
+ 0.15
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
DimensionsMarking
Frequency correction factor for ripple current
(Unit : mm)
R. Voltage
(V.DC)
10 16 25 35 50 63 80
100
Code ACEVHJK2A
Mar. 201602
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
Endurance : 125 °C 1000 h (08×10.2 < : 2000 h)
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Size
✽
code
Specifi cation
Part No. Refl ow
Min. Packaging Q'ty
0
DL
Ripple
current
(100 kHz)
(+125 °C)
(mA r.m.s.)
ESR
(100 kHz)
(+20 °C)
(Ω)
tan
d
(120 Hz)
(+20 °C)
Taping
(pcs)
10
100 8 6.2 E 100 1.00 0.30 EEETG1A101P (2) 1000
220
8 6.2(E)1001.000.30EEETG1A221UP (2) 1000
8 10.2 F 197 0.50 0.30 EEETG1A221P (2) 500
330
8 10.2 (F) 197 0.50 0.30 EEETG1A331UP (2) 500
10 10.2 G 270 0.30 0.30 EEETG1A331P (2) 500
470 10 10.2 (G) 270 0.30 0.30 EEETG1A471UP (2) 500
1000 12.5 13.5 H13 800 0.12 0.30 EEVTG1A102Q (3) 200
1500 12.5 13.5 (H13) 800 0.12 0.30 EEVTG1A152UQ (3) 200
2200 16 16.5 J16 1100 0.08 0.32 EEVTG1A222M (3) 125
3300
16 16.5 (J16) 1100 0.08 0.34 EEVTG1A332UM (3) 125
18 16.5 K16 1300 0.075 0.34 EEVTG1A332M (3) 125
4700 18 16.5 K16 1300 0.075 0.36 EEVTG1A472M (3) 125
16
100 8 10.2 F 197 0.50 0.23 EEETG1C101P (2) 500
220
8 10.2 (F) 197 0.50 0.23 EEETG1C221UP (2) 500
10 10.2 G 270 0.30 0.23 EEETG1C221P (2) 500
330
10 10.2 (G) 270 0.30 0.23 EEETG1C331UP (2) 500
12.5 13.5 H13 800 0.12 0.23 EEVTG1C331Q (3) 200
470 12.5 13.5 H13 800 0.12 0.23 EEVTG1C471Q (3) 200
680 12.5 13.5 H13 800 0.12 0.23 EEVTG1C681Q (3) 200
1000
12.5 13.5 (H13) 800 0.12 0.23 EEVTG1C102UQ (3) 200
16 16.5 J16 1100 0.08 0.23 EEVTG1C102M (3) 125
2200
16 16.5 (J16) 1100 0.08 0.25 EEVTG1C222UM (3) 125
18 16.5 K16 1300 0.075 0.25 EEVTG1C222M (3) 125
3300 18 16.5 K16 1300 0.075 0.27 EEVTG1C332M (3) 125
25
47 8 6.2 E 100 1.00 0.18 EEETG1E470P (2) 1000
100
8 6.2(E)1001.000.18EEETG1E101UP (2) 1000
8 10.2 F 197 0.50 0.18 EEETG1E101P (2) 500
220
8 10.2 (F) 197 0.50 0.18 EEETG1E221UP (2) 500
10 10.2 G 270 0.30 0.18 EEETG1E221P (2) 500
330
10 10.2 (G) 270 0.30 0.18
EEETG1E331UP (2) 500
12.5 13.5 H13 800 0.12 0.18 EEVTG1E331Q (3) 200
470 12. 5 13. 5 H13 8 0 0 0 .12 0.18 EEVTG1E471Q (3) 200
680
12.5 13.5 (H13) 800 0.12 0.18 EEVTG1E681UQ (3) 200
16 16.5 J16 1100 0.08 0.18 EEVTG1E681M (3) 125
1000
16 16.5 (J16) 1100 0.08 0.18 EEVTG1E102UM (3) 125
18 16.5 K16 1300 0.075 0.18 EEVTG1E102M (3) 125
2200 18 16.5 K16 1300 0.075 0.20 EEVTG1E222M (3) 125
35
33 8 6.2 E 100 1.00 0.16 EEETG1V330P (2) 1000
47
8 6.2(E)1001.000.16EEETG1V470UP (2) 1000
8 10.2 F 197 0.50 0.16 EEETG1V470P (2) 500
100
8 10.2 (F) 197 0.50 0.16 EEETG1V101UP (2) 500
10 10.2 G 270 0.30 0.16 EEETG1V101P (2) 500
220 10 10.2 (G) 270 0.30 0.16 EEETG1V221UP (2) 500
330 12.5 13.5 H13 800 0.12 0.16 EEVTG1V331Q (3) 200
470
12.5 13.5 (H13) 800 0.12 0.16 EEVTG1V471UQ (3) 200
16 16.5 J16 1100 0.08 0.16 EEVTG1V471M (3) 125
680
16 16.5 (J16) 1100 0.08 0.16 EEVTG1V681UM (3) 125
18 16.5 K16 1300 0.075 0.16 EEVTG1V681M (3) 125
1000 18 16.5 K16
1300
0.075 0.16 EEVTG1V102M (3) 125
✽
Size code( ) : Miniaturization product
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M”
Characteristics list
Mar. 201602
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Size
✽
code
Specifi cation
Part No. Refl ow
Min. Packaging Q'ty
0
DL
Ripple
current
(100 kHz)
(+125 °C)
(mA r.m.s.)
ESR
(100 kHz)
(+20 °C)
(Ω)
tan
d
(120 Hz)
(+20 °C)
Taping
(pcs)
50
10 8 6.2 E 80 1.60 0.14 EEETG1H100P (2) 1000
22 8 6.2 E 80 1.60 0.14 EEETG1H220P (2) 1000
33
8 6.2(E) 801.600.14EEETG1H330UP (2) 1000
8 10.2 F 133 0.75 0.14 EEETG1H330P (2) 500
47
8 10.2 (F) 133 0.75 0.14 EEETG1H470UP (2) 500
10 10.2 G 221 0.50 0.14 EEETG1H470P (2) 500
100 10 10.2 (G) 221 0.50 0.14 EEETG1H101UP (2) 500
220 12.5 13.5 H13 600 0.23 0.14 EEVTG1H221Q (3) 200
330 12.5 13.5 H13 600 0.23 0.14 EEVTG1H331Q (3) 200
470 16 16.5 J16 9 0 0 0.15 0.14 EEVTG1H471M (3) 125
680
16 16.5 (J16) 900 0.15 0.14 EEVTG1H681UM (3) 125
18 16.5 K16 950 0.14 0.14 EEVTG1H681M (3) 125
1000 18 16.5 K16 950 0.14 0.14 EEVTG1H102M (3) 125
63
10 8 6.2 E 55 2.20 0.12 EEETG1J100P (2) 1000
22 8 10.2 F 100 1.00 0.12 EEETG1J220P (2) 500
33
8 10.2 (F) 100 1.00 0.12 EEETG1J330UP (2) 500
10 10.2 G 150 0.80 0.12 EEETG1J330P (2) 500
47
8 10.2 (F) 100 1.00 0.12 EEETG1J470UP (2) 500
10 10.2 G 150 0.80 0.12 EEETG1J470P (2) 500
100
10 10.2 (G) 150 0.80 0.12 EEETG1J101UP (2) 500
12.5 13.5 H13 350 0.26 0.12 EEVTG1J101Q (3) 200
220 12.5 13.5 H13 350 0.26 0.12 EEVTG1J221Q (3) 200
3 3 0 16 16.5 J16 50 0 0.18 0.12 EEVTG1J331M (3) 125
470 16 16.5 J16 5 0 0 0.18 0.12 EEVTG1J471M (3) 125
80
10 8 10.2 F 70 1.30 0.12 EEETG1K100P (2) 500
22
8 10.2 (F) 70 1.30 0.12 EEETG1K220UP (2) 500
10 10.2 G 90 1.00 0.12 EEETG1K220P (2) 500
33
8 10.2 (F) 70 1.30 0.12 EEETG1K330UP (2) 500
10 10.2 G 90 1.00 0.12 EEETG1K330P (2) 500
47
10 10.2 (G) 90 1.00 0.12 EEETG1K470UP
(2) 500
12.5 13.5 H13 250 0.42 0.12 EEVTG1K470Q (3) 200
100
12.5 13.5 (H13) 250 0.42 0.12 EEVTG1K101UQ (3) 200
16 16.5 J16 350 0.30 0.12 EEVTG1K101M (3) 125
220
16 16.5 (J16) 350 0.30 0.12 EEVTG1K221UM (3) 125
18 16.5 K16 400 0.28 0.12 EEVTG1K221M (3) 125
330
16 16.5 (J16) 350 0.30 0.12 EEVTG1K331UM (3) 125
18 16.5 K16 400 0.28 0.12 EEVTG1K331M (3) 125
470 18 16.5 K16 400 0.28 0.12 EEVTG1K471M (3) 125
100
10 8 10.2 F 70 1.30 0.10 EEETG2A100P (2) 500
22
8 10.2 (F) 70 1.30 0.10 EEETG2A220UP (2) 500
10 10.2 G 90 1.00 0.10 EEETG2A220P (2) 500
33 10 10.2 G 90 1.00 0.10 EEETG2A330P (2) 500
47 12.5 13.5 H13 250 0.42 0.10 EEVTG2A470Q (3) 200
100 16 16.5 J16 350 0.30 0.10 EEVTG2A101M (3) 125
220 18 16.5 K16 400 0.28 0.10 EEVTG2A221M (3) 125
330 18 16.5 K16 400 0.28 0.10 EEVTG2A331M (3) 125
✽
Size code( ) : Miniaturization product
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M”
Endurance : 125 °C 1000 h (08×10.2 < : 2000 h)
Characteristics list
Mar. 201602
P1-P3

EEV-TG1V471UQ

Mfr. #:
Buy EEV-TG1V471UQ
Manufacturer:
Panasonic
Description:
Aluminum Electrolytic Capacitors - SMD 470UF 35V TG SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet