http://www.tracopower.com
Input Specifications
Maximum input current (at Vin min. and 1 A output current) 1 A
No load input current 1 mA typ.
Reflected ripple current 150 mA
Input filter internal capacitor
Output Specifications
Voltage set accuracy ±2 %
Regulation – Input variation 0.2 %
– Load variation (0 – 100 %) 0.6 %
– Load variation (10 – 90 %) 0.3 %
Minimum load not required
Ripple and noise (20 MHz Bandwidth) Vout < 8 VDC: 50 mVp-p typ.
Vout > 8 VDC: 75 mVp-p typ.
Temperature coefficient ±0.015 % / °C max.
Dynamic load response 50% load change (upper half) 200 mV max. peak variation
250 µs max. response time
Startup rise time 10 % to 90 % Vout 5 ms
Short circuit protection continuous, automatic recovery
Current limitation TSR 1-05xxSM models: at 4.8 A typ.
other models: at 2.5 A typ.
Capacitive load 470 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Max. casing temperature 105°C
– Storage –55°C to +125°C
Derating 2.5 %/K above 65°C
Thermal shock & vibration acc. MIL-STD-810F
Humidity (non condensing) 5 – 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >12 Mio. h
Isolation voltage none
Switching frequency (pulse width modulation) TSR 1-05xxSM models: 1200 kHz
other models: 500 kHz
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non-conductive plastic
Package weight 1.7 g (0.06 oz)
Lead-free reflow solder process as per J-STD-020D.01 (to find at:
www.jedec.org - free registration rqueired)
– max. peak body temperature 245°C
Moisture sensitivity level (MSL) level 1 as per IPC J-STD-033B.1 (to find at:
www.jedec.org - free registration required)
Washing baking after washing: 100°C for 30 min.
DC/DC Converters
TSR-1SM Series 1 A
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 3
