OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HCPL-2503#320

P1-P3P4-P6P7-P9P10-P12
HCPL-2503
Single Channel, High Speed Logic Interface Optocoupler
Data Sheet
Features
• Data rates to 250 kb/s NRZ
• LSTTL compatible
• High common mode transient immunity:
> 1000 V/µs
• 3750 Vdc withstand test voltage
• Open collector output
• Guaranteed performance from temperature: 0°C to
70°C
• Safety approval
- UL Recognized - 3750Vrms for 1min (5000Vrms for
1 min Option 020 devices) per UL1577.
- IEC/EN/DIN EN 60747-5-2 Approved
- VIORM = 630 Vpeak for option 060
Applications
• High speed logic ground isolation
– LSTTL-to-LSTTL and TTL-to-LSTTL
• High voltage isolation
• Analog signal ground isolation
Description
The HCPL-2503 optocoupler is specied for use in LSTTL-
to-LSTTL and TTL-to-LSTTL logic interfaces. A nominal
8 mA sink current through the input LED will provide
enough output current for proper operation of 1 LSTTL
gate under worst-case conditions when used in the rec-
ommended circuits. The CTR of the HCPL-2503 is 15%
minimum at I
F
= 8 mA.
The HCPL-2503 contains a light emitting diode and an in-
tegrated photon detector with a 3000 Vdc withstand test
between input and output. Separate connection for the
photodiode bias and output transistor collector reduce
the base-collector capacitance, giving improved speed
compared with conventional phototransistor couplers.
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Schematic
- A 0.1uF bypass capacitor must be connected between 5 and 8.
I
F
SHIELD
8
6
5
GND
V
CC
2
3
V
O
I
CC
V
F
I
O
ANODE
CATHODE
+
-
7
V
B
I
B
*
2
Outline Drawing
1.080 ± 0.320
(0.043 ± 0.013)
2.54 ± 0.25
(0.100 ± 0.010)
0.51 (0.020) MIN.
0.65 (0.025) MAX.
4.70 (0.185) MAX.
2.92 (0.115) MIN.
5¡ TYP.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
9.65 ± 0.25
(0.380 ± 0.010)
1.78 (0.070) MAX.
1.19 (0.047) MAX.
A XXXXZ
YYWW
DATE CODE
DIMENSIONS IN MILLIMETERS AND (INCHES).
5678
4321
OPTION CODE*
UL
RECOGNITION
UR
TYPE NUMBER
*MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
12¡ NOM.
9.65 ± 0.25
(0.380 ± 0.010)
0.635 ± 0.130
(0.025 ± 0.005)
7.62 ± 0.25
(0.300 ± 0.010)
5
6
7
8
4
3
2
1
9.65 ± 0.25
(0.380 ± 0.010)
6.350 ± 0.25
(0.250 ± 0.010)
1.016 (0.040)
1.27 (0.050)
10.9 (0.430)
2.0 (0.080)
LAND PATTERN RECOMMENDATION
1.080 ± 0.320
(0.043 ± 0.013)
3.56 ± 0.13
(0.140 ± 0.005)
1.780
(0.070)
MAX.
1.19
(0.047)
MAX.
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
8-Pin DIP Package
8-Pin DIP Package with Gull Wing Surface Mount Option 300
3
Absolute Maximum Ratings
Storage Temperature ...........................................................................................................................................................–55°C to +125°C
Operating Temperature .....................................................................................................................................................–55°C to +100°C
Lead Solder Temperature (1.6 mm below seating plane) ............................................................................................260°C for 10 s
Average Input Current – I
F
................................................................................................................................................................ 25 mA
[1]
Peak Input Current – I
F
(50% duty cycle, 1 ms pulse width) ................................................................................................ 50 mA
[2]
Peak Transient Input Current – I
F
(≤1 µs pulse width, 300 pps) ....................................................................................................1.0 A
Reverse Input Voltage – V
R
(Pin 3-2) .......................................................................................................................................................... 5 V
Input Power Dissipation ..................................................................................................................................................................... 45 mW
[3]
Average Output Current – I
O
(Pin 6) ......................................................................................................................................................8 mA
Peak Output Current – I
O
....................................................................................................................................................................... 16 mA
Emitter-Base Reverse Voltage (Pin 5-7) ..................................................................................................................................................... 5 V
Supply and Output Voltage – V
CC
(Pin 8-5), V
O
(Pin 6-5) .................................................................................................. –0.5 V to 7 V
Base Current – I
B
(Pin 7) ..............................................................................................................................................................................5 mA
Output Power Dissipation ..............................................................................................................................................................100 mW
[4]
Notes:
1. Derate linearly above +70˚C free-air temperature at a rate of 0.8 mA/˚C.
2. Derate linearly above +70˚C free-air temperature at a rate of 1.6 mA/˚C.
3. Derate linearly above +70˚C free-air temperature at a rate of 0.9 mW/˚C.
4. Derate linearly above +70˚C free-air temperature at a rate of 2.0 mW/˚C.
Ordering Information
HCPL-2503 is UL Recognized with 3750 Vrms and 5000 Vrms (option 020) for 1 minute per UL1577. All devices above
listed are approved under CSA Component Acceptance Notice #5, File CA 88324.
Part
number
Option
Package
Surface
Mount
Gull
Wing
Tape
& Reel
UL 5000
Vrms/1
Minute rating
IEC/EN/DIN EN
60747-5-2 Quantity
RoHS
Compliant
Non RoHS
Compliant
HCPL-2503
-000E No option
300mil
DIP-8
50 per tube
-300E -300 X X 50 per tube
-500E -500 X X X 1000 per reel
-020E -020 X 50 per tube
-320E -320 X X X 50 per tube
-520E -520 X X X X 1000 per reel
-060E -060 X 50 per tube
-360E -360 X X X 50 per tube
-560E -560 X X X X 1000 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-2503-000E to order product of 300mil DIP package with RoHS compliant.
Example 2:
HCPL-2503 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
P1-P3P4-P6P7-P9P10-P12

HCPL-2503#320

Mfr. #:
Buy HCPL-2503#320
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 1MBd 1Ch 25mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet