ICL8069
Low-Voltage Reference
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(T
A
= +25°C, unless otherwise noted.) (Note 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 2: If circuit strays in excess of 200pF are anticipated, a 4.7µF shunt capacitor will ensure stability under all operating condi-
tions.
Note 3: For military devices, measurements are made at +25°C, -55°C, and +125°C, while for commercial devices measurements
are made at +25°C, 0°C, and +70°C. The units are then classified as a function of the worst-case TC. Sample tested to 0.1%
AQL.
Reverse Voltage ..............................................................(Note 1)
Forward Current ..................................................................10mA
Reverse Current ..................................................................10mA
Power Dissipation.......Limited by Max Forward/Reverse Current
Storage Temperature Range .............................-65°C to +150°C
Operating Temperature Ranges
ICL8069C.............................................................0°C to +70°C
ICL8069E ..........................................................-40°C to +85°C
ICL8069M .......................................................-55°C to +125°C
Lead Temperature (soldering, 10s) .................................+300°C
I
R
= 50µA,
I
R
= 500µA
I
R
= 500µA,
T
A
= operating
temperature range
(Note 3)
I
R
= 500µA
I
F
= 500µA
10Hz ≤ f ≤ 10kHz,
I
R
= 500µA
CONDITIONS
Ω
12
Reverse Dynamic Impedance
ppm/°C
10
V1.20 1.23 1.25Output Voltage
Output Voltage
Temperature Coefficient
V0.7 1Forward Voltage Drop
µV5RMS Noise Voltage
mA0.050 5Reverse Current Range
UNITSMIN TYP MAXPARAMETER
0.6 2
50µA ≤ I
R
≤ 5mA mV15 20Output Voltage Change
50
25
100
ICL8069A
ICL8069D
ICL8069C
ICL8069B
Note 1: In normal use, the reverse voltage cannot exceed the reference voltage. However, when plugging units into a powered-up
test fixture, an instantaneous voltage equal to the compliance of the test circuit will be seen. This should not exceed 20V.
