AD7792/AD7793
Rev. B | Page 11 of 32
OUTPUT NOISE AND RESOLUTION SPECIFICATIONS
EXTERNAL REFERENCE
Tabl e 5 shows the output rms noise of the AD7792/AD7793 for
some of the update rates and gain settings. The numbers given
are for the bipolar input range with an external 2.5 V reference.
These numbers are typical and are generated with a differential
input voltage of 0 V.
Table 6 and Table 7 show the effective
resolution, with the output peak-to-peak (p-p) resolution
shown in parentheses for the AD7793 and AD7792, respectively.
It is important to note that the effective resolution is calculated
using the rms noise, while the p-p resolution is based on the p-p
noise. The p-p resolution represents the resolution for which
there is no code flicker. These numbers are typical and are
rounded to the nearest LSB.
Table 5. Output RMS Noise (μV) vs. Gain and Output Update Rate for the AD7792 and AD7793 Using an External 2.5 V Reference
Update Rate (Hz) Gain of 1 Gain of 2 Gain of 4 Gain of 8 Gain of 16 Gain of 32 Gain of 64 Gain of 128
4.17 0.64 0.6 0.29 0.22 0.1 0.065 0.039 0.041
8.33 1.04 0.96 0.38 0.26 0.13 0.078 0.057 0.055
16.7 1.55 1.45 0.54 0.36 0.18 0.11 0.087 0.086
33.2 2.3 2.13 0.74 0.5 0.23 0.17 0.124 0.118
62 2.95 2.85 0.92 0.58 0.29 0.2 0.153 0.144
123 4.89 4.74 1.49 1 0.48 0.32 0.265 0.283
242 11.76 9.5 4.02 1.96 0.88 0.45 0.379 0.397
470 11.33 9.44 3.07 1.79 0.99 0.63 0.568 0.593
Table 6. Typical Resolution (Bits) vs. Gain and Output Update Rate for the AD7793 Using an External 2.5 V Reference
Update Rate (Hz) Gain of 1 Gain of 2 Gain of 4 Gain of 8 Gain of 16 Gain of 32 Gain of 64 Gain of 128
4.17 23 (20.5) 22 (19.5) 22 (19.5) 21.5 (19) 21.5 (19) 21 (18.5) 21 (18.5) 20 (17.5)
8.33 22 (19.5) 21.5 (19) 21.5 (19) 21 (18.5) 21 (18.5) 21 (18.5) 20.5 (18) 19.5 (17)
16.7 21.5 (19) 20.5 (18) 21 (18.5) 20.5 (18) 20.5 (18) 20.5 (18) 20 (17.5) 19 (16.5)
33.2 21 (18.5) 20 (17.5) 20.5 (18) 20 (17.5) 20.5 (18) 20 (17.5) 19 (16.5) 18.5 (16)
62 20.5 (18) 19.5 (17) 20.5 (18) 20 (17.5) 20 (17.5) 19.5 (17) 19 (16.5) 18 (15.5)
123 20 (17.5) 19 (16.5) 19.5 (17) 19 (16.5) 19.5 (17) 19 (16.5) 18 (15.5) 17 (14.5)
242 18.5 (16) 18 (15.5) 18 (15.5) 18 (15.5) 18.5 (16) 18.5 (16) 17.5 (15) 16.5 (14)
470 18.5 (16) 18 (15.5) 18.5 (16) 18.5 (16) 18 (15.5) 18 (15.5) 17 (14.5) 16 (13.5)
Table 7. Typical Resolution (Bits) vs. Gain and Output Update Rate for the AD7792 Using an External 2.5 V Reference
Update Rate (Hz) Gain of 1 Gain of 2 Gain of 4 Gain of 8 Gain of 16 Gain of 32 Gain of 64 Gain of 128
4.17 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16)
8.33 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16)
16.7 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16)
33.2 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16)
62 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (15.5)
123 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 16 (16) 165 (15.5) 16 (14.5)
242 16 (16) 16 (15.5) 16 (15.5) 16 (15.5) 16 (16) 16 (16) 16 (15) 16 (14)
470 16 (16) 16 (15.5) 16 (16) 16 (16) 16 (15.5) 16 (15.5) 16 (14.5) 15.5 (13.5)