SRW18USG

SmartRack 18U Low-Profile Switch-Depth Wall-

Mount Rack Enclosure Cabinet with Clear Acrylic

Window, Hinged Back

MODEL NUMBER: SRW18USG

Wall-mount cabinet secures and organizes 18U of 19-inch rack equipment in network closets, classrooms

and other locations with limited floor space. Clear acrylic window allows you to monitor equipment without

unlocking door.

Description

The SRW18USG SmartRack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is ideal

acoustic noise, but it also adds visual flair to your IT installation.

The cabinet swings away from the wall on a sturdy hinge, allowing easy access to equipment and cabling

during installation and maintenance. To ensure your valuable equipment stays secure, the doors and side

panels lock. The top, bottom and removable side panels are vented, which allows air to flow freely through

the rack to keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180°

before mounting. Convenient top and bottom ports allow easy cable routing through the cabinet.

The SRW18USG comes fully assembled and ready to mount to the wall. Square and threaded mounting

holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in

7/8-inch increments to house equipment up to 20.5 inches deep, such as network switches and patch

panels.

●

Front door includes shatter-

resistant clear acrylic window

●

Locking steel cabinet vented at

sides, top and bottom

●

Secures 18U of 19 in. rack

equipment up to 20.5 in. deep

●

●

(42) M6 cage nuts

●

(42) M6 washers

●

(42) 12-24 screws

●

(2) Keys

●

Owner’s manual

Saves Valuable Workspace

Perfect for network closets, retail locations, classrooms and other areas with limited floor space where

you need equipment to be secure, organized and out of the way

●

Houses EIA-standard 19 in. rack equipment in 18U of space

●

Maximum load capacity of 250 lb.

●

Hinged Cabinet for Convenient Access

Swings away from the wall to allow easy access to equipment and cabling during installation and

●

Prevents equipment tampering

●

Reduces acoustic noise

●

Provides extra visual flair

●

Keeps Important Equipment Secure

Side panels and front door lock securely

●

●

Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit

●

Wall-mounting holes spaced 16 in. apart to accommodate standard wall stud placement

●

Vertical mounting rails adjust in 7/8 in. increments to house equipment up to 20.5 in. deep

●

Rails support square-hole or 12-24 threaded-hole mounting

●

Rack spaces numbered for easy reference

UPC Code 037332187376

© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does

not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:

https://www.tripplite.com/products/product-certification-agencies

PHYSICAL

Rack Height (U Spaces) 18

Maximum Device Depth (in.) 20.5

Maximum Device Depth (cm) 52.07

Shipping Dimensions (hwd / in.) 41.000 x 27.000 x 24.000

Unit Weight (lbs.) 96

Unit Weight (kg) 43.54

Color Black

Weight Capacity - Stationary (lbs.) 250

Weight Capacity - Stationary (kg) 113

Factory Preset Rack Depth (in.) 10.42

Factory Preset Rack Depth (cm) 26.5

Factory Preset Rack Depth (mm) 265

Maximum Device Depth (mm) 521

Minimum Device Depth (mm) 76

SPECIAL FEATURES

Grounding Lug Front and Back door frames

CERTIFICATIONS