THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
C
DO NOT
SCALE FROM
THIS PRINT
T2M-1XX-XX-X-D-XX-XX
No OF POSITIONS
**-02, **-04, -05, -07, -10, -15,
-20,-25, & -30 (PER ROW)
AVAILABLE AS STANDARD;
OTHER SIZES BETWEEN -05
THRU -50 AVAILABLE AS ASO
LEAD STYLE
-01
PLATING SPECIFICATION
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE T-1S13-XX-L-2)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE T-1S13-XX-S-2)
OPTION
-DS: DUAL SCREW DOWN (SEE FIG 6, SHT 3)
(FOR 1.57mm [.062] PCB)
(AVAILABLE 5-30 POSITIONS ONLY)
(NOT AVAILABLE WITH -RA, -WT OPTIONS)
(USE T-1S13-04-X-2 WITH TH OPTION
AND TI-M2-4-VSFM-T,
USE T-1S13-20-X-2 WITH SM OPTION
AND TI-M2-4-VSFM-T)
-K: POLYIMIDE FILM (-SM OPTION ONLY)
(USE K-DOT-.295-.406-.005, SEE FIG 4)
(NOT AVAILABLE IN -02 OR -04 POSITIONS)
-TR: TAPE & REEL (-SM OPTION ONLY)
(NOT AVAILABLE IN -02 OR -04 POSITIONS)
-WT: WELD TAB : (USE WT-25-07-T);
(-SM, SEE FIG 3, SHT 2)
(-TH, SEE FIG 5, SHT 2)
-RA: (USE WT-81-01-T)
OPTION
-TH: THROUGH HOLE (SEE FIG 1)
-RA: RIGHT ANGLE (SEE FIG 2)
-SM: SURFACE MOUNT (SEE FIG 3, SHT 2)
ROW SPECIFICATION
-D: DOUBLE ROW
+5.674[.2234] REF
(NO OF POS x 2.000[.0787)
+0.550[.0217] REF
(NO OF POS x 2.000[.0787)
6.26
REF
.246
4.51
REF
.178
0.51
REF
.020
7.44
REF
.293
5.08
REF
.200
(SEE NOTE 5)
2.000 .079
(NO OF POS-1) x 2.000[.0787) REF
2.00
REF (TYP)
.079
3.52 .139
01
02
C
L
C
L
+3.854[.1517] REF
(NO OF POS x 2.000[.0787)
0.38
REF
.015
5.79 .228
REF
0.50
SQ
.020
REF (TYP)
0.25
REF
.010
2.41 .095
(TYP)
2
MAX SWAY
(TYP)
2
MAX SWAY
(EITHER DIRECTION)
"A"
"A"
T-1S13-07-X-2
FIRST POSITION
INDICATOR
T2M-XX-D
WT-25-07-T
4.14
REF
.163
0.64 .025
REF
7.67 .302
REF
2.97 .117
2
MAX SWAY
(TYP)
SECTION "A"-"A"
C
L
C
C
** = ONLY AVAILABLE WITH -SM-WT OR -RA-WT OPTIONS
FIG 1
T2M-105-01-X-D-TH-XX
( = ONLY APPLICABLE WITH -WT OPTION)
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
2mm SHROUDED TERMINAL STRIP
BY:
T2M-1XX-XX-X-D-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
J. BORGELT
3/23/09
3
1
SHEET SCALE: 2:1
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOS BRONZE
WELD TAB: PHOS BRONZE
KAPTON: POLYIMIDE FILM
F:\DWG\MISC\MKTG\T2M-1XX-XX-X-D-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 4.44N[1.0 LB].
3. POST HEIGHT VARIATION BETWEEN ANY TWO
PINS: 0.13[.005] MAXIMUM.
4. MAXIMUM PIN ROTATION IN BODY TO BE 2
.
5. DUAL POLARIZATION SLOT NOT AVAILABLE ON
CONNECTOR WITH LESS THAN 5 POSITIONS.
6. MINIMUM RETENTION FORCE FOR WELD TABS: 4.44N[1.0 LB].
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AA
