Product Specification
PE42422
©2012 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 13
Document No. 70-0400-01 | www.psemi.com
Table 5. Absolute Maximum Ratings
Notes: 1. V
DD
within operating range specified in Table 4
2. HBM ESD Voltage (MIL_STD 883 Method 3015.7)
3. MM ESD Voltage (JEDEC JESD22-A115-A)
Table 4. Operating Ranges
Parameter Min Typ Max Units
V
DD
Supply Voltage 2.3 3.3 5.5 V
I
DD
Power Supply Current 120 200 µA
RFX-RFC input power (50Ω ) +32 dBm
Control Voltage High 1.2 1.5 3.3 V
Control Voltage Low 0 0 0.5 V
Operating temperature range -40 +25 +85 °C
Parameter/Conditions Min Units
P
MAX
Input Power
1
dBm
ESD Voltage HBM
2
RF pins to GND
All other pins
V
V
ESD Voltage MM, all pins
3
V
Max
+32
4000
1000
200
T
ST
Storage Temperature
-65 +150
°C
Figure 3. Pin Configuration (Top View)
Table 2. Pin Descriptions
Pin No. Pin Name Description
1 GND Ground
2 RF2
1
RF Port 2
3 GND Ground
4 GND Ground
5 RFC
1
RF Common
6 GND Ground
7 GND Ground
8 RF1
1
RF Port 1
9 DGND Digital Ground
10 V1 Switch control input, CMOS logic level
11 LS Logic Select, CMOS logic level
12 V
DD
Supply
Paddle GND Ground for proper device operation
Note 1: Blocking capacitors needed only when non-zero DC voltage present
Table 3. Truth Table
Path V1 LS
RFC-RF2 1 1
RFC-RF1 0 1
RFC-RF1 1 0
RFC-RF2 0 0
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS
®
devices are immune to latch-up.
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS
®
device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating.
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE42422 in the 12-lead 2x2x0.55 mm QFN
package is MSL1.
Exceeding absolute maximum ratings may cause
permanent damage. Operation should be restricted
to the limits in the Operating Ranges table.