EVAL-ADUM5028EBZ

EVAL-ADuM5028EBZ User Guide UG-1263
Rev. A | Page 7 of 8
ORDERING INFORMATION
BILL OF MATERIALS
Table 4.
Reference Designator Description Supplier Part No.
U2 ADuM5028 low emission isolated, dc-to-dc converter Analog Devices ADuM5028-5BRIZ
U1 ADP7104 20 V, 500 mA, low noise, complimentary metal oxide
semiconductor (CMOS) LDO
Analog Devices ADP7104ACPZ
C1, C2, C5, C6, C8 Capacitors, X7R, 10 μF, 0805 Wurth Elektronik 885012207026
C3, C4, C7 Capacitors, X7R, 0.1 μF, 0603 Wurth Elektronik 885012206046
E1, E4, E5 Ferrite beads, 1500 Ω, 0603 Murata BLM18HE152SN1D
E2, E3 Ferrite beads, 1.8 at 100 MHz, 0402 Taiyo Yuden BKH1005LM182-T
JP1 100 mil (2.54 mm) connector PCB header Wurth Elektronik 61300421121
Not applicable 100 mil (2.54 mm) jumper FCI 65474-001LF
P1 Connector, PCB, terminal block, 5.0 mm pitch, 16-26 AWG Wurth Elektronik 691213710003
P3, P6 Connectors, PCB, terminal blocks, horizontal cable entry, 5 mm
pitch
Wurth Elektronik 691 213 710 002
R10 Resistor, 22.1 kΩ, 0603 Panasonic ERJ-3EKF2212V
R8, R11 Resistors, 13.0 , 0603 Panasonic ERJ-3EKF1302V
R13 Resistor, 100 , 0603 Panasonic ERJ-3EKF1003V
R3 Resistor, 0 , 0603 Vishay CRCW06030000Z0EA
R9 Resistor, 18.2 , 0603 Panasonic ERJ-3EKF1822V
TP1 to TP6 Connector PCB test points Vero Technology 20-2137
P2, P5 Connector PCB headers, 2.54 mm, 3 position vertical (not
installed)
MOLEX 22-03-2031
R12
Resistor, 0 Ω, 0603 (not installed)
Panasonic
ERJ-3GEY0R00V
R2 Resistor, 0 Ω, 0603 (not installed) Vishay CRCW06030000Z0EA
R1, R4 to R7, R14 Resistors, 300 Ω, 0805 (not installed) Panasonic ERJ-6ENF3000V
RELATED LINKS
Resource Description
ADuM5028 Low Emission, Isolated, DC-to-DC Converter
AN-1349 PCB Implementation Guidelines to Minimize Radiated Emissions on the ADM2582E/ADM2587E RS-485/RS-422 Transceivers
AN-0971
Recommendations for Control of Radiated Emissions with
iso
Power® Devices
UG-1263 EVAL-ADuM5028EBZ User Guide
Rev. A | Page 8 of 8
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
Third Party includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICEN
SORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed
in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2018
Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG16695-0-
7/18(A)

EVAL-ADUM5028EBZ

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
ADuM5028 and ADUM6028 2--layr eval brd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet