Photodiode in Plastic Surface Mount Package
WWW.LUNAINC.COM
Precision – Control – Results
Information in this technical datasheet is believed to
be correct and reliable. However, no responsibility is
assumed for possible inaccuracies or omission.
Specifications are subject to change without notice.
Page 1/2
© 2016 Luna Optoelectronics. All rights reserved.
Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935
DESCRIPTION FEATURES
The PDB-C152SM is a blue enhanced PIN silicon photodiode in a
photoconductive mode packaged in a water clear surface mount package.
• Surface Mount
• Photoconductive
• High Speed
• Low cost
RELIABILITY APPLICATIONS
Contact Luna for recommendations on specific test conditions and
procedures.
• Industrial Controls
• Opto Switches
• Opto Counters
ABSOLUTE MAXIMUM RATINGS
SYMBOL MIN MAX UNITS
Reverse Voltage - - 50 V T
a
= 23°C UNLESS OTHERWISE NOTED
Storage Temperature -40 - +125 °C -
Operating Temperature -40 to +80 °C -
Soldering Temperature* - - +240 °C -
* 1/16 inch from case for 3 seconds max.
PACKAGE DIMENSIONS INCH [mm]
CHIP DIMENSIONS INCH [mm]
SURFACE MOUNT PACKAGE
.038 [0.97] SQUARE
.032 [0.81] SQUARE
ACTIVE AREA
.079 [2.00]
.126 [3.20]
.032 [0.80]
.063 [1.60]
120°
VIEWING
ANGLE
.024 [0.60]
.079 [2.00]
.043 [1.10]
.020 [0.50]
2X .020 [0.50]
.087 [2.20]
GREEN CATHODE
MARK
ANODE