ALPHA WIRE COMPANY
CUSTOMER PRODUCT SPECIFICATION
Part Numbers: PMS12-PMS25 Issue: 2
Spec Number: PMS METRIC Issue Date: 02/27/2018
Page 1 of 1 Pages Effective Date: 02/27/2018
Although Alpha Wire ("Alpha") makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of
or in connection with the use, or inability to use, the information or specifications described herein.
711 Lidgerwood Ave Elizabeth, NJ 07207-0711
Toll Free 1-800-52 ALPHA • T: 1-908-925-8000 • F: 908-925-5411 • Email: info@alphawire.com
www.alphawire.com
A. Technical Details
1) Material
a) Body PA 6 (Polyamide 6)
b) Cap PA 6 (Polyamide 6)
c) Seal CR (Chloroprene Rubber)
2) Color
a) Gray, RAL 7001
b) Black, RAL 9005
3) Protection Class
a) IP 68 5 Bar, 30 min
b) IP 66
4) Flammability
a) V2 (According to UL94)
5) Temperature Rating
a) Permanent -20°C to +100°C
b) Intermittent -30°C to +150°C
6) Thread Type
a) Metric according to EN 60423
7) Approvals
a) UL UL 514
b) CSA CSA C22.2
B. Packaging Requirements
1) Standard Package 10 glands per package
Clamping Range
Ø min-max
mm
Spanner Width
SW CAP SW BODY
mm mm
