OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HT111/9H-60

P1-P3P4-P6
1
2015.7
e
EV Series
125A High-Current Waterproof Connectors
■Features
1. Screw Cramp
Reliable lock by screw and nut. Superior anti-
vibration performance by mounting to chassis.
2. Waterproof Structure
The EV series is IP67 water resistant in unmated
state (when EV1-62RA-3SB, EV1-62RA-2SB is
used). It is IP68/X9K water resistant in mated.
The use of special rubber component for the
internal seals enhance oil and water resistance.
3. Standard Tool for Contact Assembly
Contacts can be crimped using readily available
JIS standard tools (JIS C 9711).
4. Downsizing
Staggered panel flange design saves space.
5. Lightweight
The shell is constructed of an aluminum alloy
material enabling it to be lightweight.
6. Multi-Point Contact Spring
Highly reliable contact structure allows for a high
current capability, guards against vibration to the
contact and decreases contact resistance.
7. Shielded Design
The metal shell enhances EMI shielding.
8. Finger Protection
Contact and connector design protects against
accidental electrical shock using IEC 60601 test
procedure.
[Derating Curve]
[Temperature Rise Curve]
Measurement Condition
The plug has three contacts where 20 mm
2
electric wires
are connected and then covered with a corrugated
housing. Measurement was taken by connecting copper
bus bars of 3 mm x 12 mm to the three contacts of the
receptacle and wiring in series.
Remarks
Derating curve and temperature rise curve changes
slightly by a given cable that is being used and slight
variations occur under the same conditions. Therefore,
the values indicated above are reference values and not
guaranteed values.
Ambient Temperature[ç]
Current [A]
Current [A]
Temperature Rise[ç]
Fig.1
Fig.2
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2
EV Series●125A High-Current Waterproof Connectors
■Product Specifications
Ratings
Current rating
125A (180A max.
*
1)
(Per cable specification and derating curve)
Operating
Temperature
-40 to +150ç
(Including temperature rise by current flow)
Voltage rating AC 460V, DC 650V
Storage
Temperature Range
-10 to +60ç
Note1 : Under the assumption that it is used at normal temperature (20ç±15ç).
Items Specifications Conditions
1. Contact resistance 0.5mø or less Measured at DC 1A
2. Insulation resistance 1000Mø or greater Measured at DC 500V
3. Withstanding voltage No flashover or breakdown AC 2000V for 1 min.
4. Vibration resistance No electric outage of 10µs or greater JIS D 1601, Type 3D -Grade 110
5. Shock No electric outage of 10µs or greater
Acceleration 490 m/s
2
, sustained period 11 ms,
Sine wave tests were conducted a total of 18 times,
three times each in 6 directions.
6. Temperature cycle
1mø or less
Insulation resistance: 100Mø or greater
Left for a total of 5 cycles of the following:
-40ç: 30 mins. ➝ Normal temperature: 2-3 min. ➝
150ç: 30 mins. ➝ Normal temperature: 2-3 mins.
7. Humidity resistance
Insulation resistance:
10Mø or greater (when highly humid)
100Mø or greater (when dry)
Left for 96 hours at temperature 40ç and humidity
95%.
8. Water proof
IP68
IPX9K
___
■Materials
Part Materials Treatment Remarks
Plug
Outer shell Aluminum alloy Nickel plated _
Insulator Polyamide(black) _ UL94V-0
Rubber sealant
Gasket
Hydrogenated nitrile rubber
Fluorosilicone rubber
__
Hexagonal bolt
Hexagonal bolt w/ hole
Copper Tervalent chromate filming _
Receptacle
Insulator Polyamide (black) _ UL94V-0
Female contact Copper Alloy Silver plated
*
2_
Contact spring Copper Alloy Silver plated
*
2_
Rubber ring
(O ring)
Hydrogenated nitrile rubber
(Fluorosilicone rubber)
__
Hexagonal bolt
Hexagonal nut
Copper/Brass
Brass
Tervalent chromate filming / Nickel plated
Nickel plated
_
Male Contact
Contact Copper alloy Silver plated
*
2_
Cap Polyamide (black) _ UL94V-0
Note2 : Silver-plated contacts can discolor by reacting to sulfur in the air (formation of silver sulfi de coat), however, they
can be used without any problem. Contact resistance may increase in an extremely rare case. If it has increased
signifi cantly, please check contact resistance before use.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3
EV Series●125A High-Current Waterproof Connectors
■Product Number Structure
●Plug
EV 1 − 62
P
* −3P C
(
**
)
qw ert yui o
●Receptacle
EV 1 − 62
R
* −3S B
(
**
)
qw ert yui o
●Male Contact
EV 1 − P C * −1 1 2
(
**
)
qw uit !0 !1 !2 o
q Model Name : EV Series
w Series Number : 1
e Shell Size : The shell size shows the case width of the plug’s mating area or outer
diameter.
r Type of Shell : P : Straight plug
R : Straight receptacle
t Symbol for Body Form Type and Applicable Cable Range Type :
A : Single unit waterproof receptacle
1 : Notched
y Number of Contacts : Number of contacts is indicated.
u Contact Polarity : P : Male Contact
S : Female Contact
i Cable Termination Method : None : Solder termination
B : Termination by screw tightening
C : Crimp termination
o Other Specifications : Two-digit figures will be added if changes other than the
above are made in the specifications.
!0 Contact Type : 1 : Loose piece contacts
!1 Contact Form, Size : Serial numbers (1,2,3, ・・・) will be changed.
!2 Plating Specification : 2 : Silver plated
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
P1-P3P4-P6

HT111/9H-60

Mfr. #:
Buy HT111/9H-60
Manufacturer:
Hirose Electric
Description:
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet