SPEC NO: DSAD2264 REV NO: V.11 DATE: JAN/25/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301000484
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
SA43-13SRWA Super Bright Red (GaAlAs) White Diffused 21000 42000
Common Anode, Rt.
&Lt. Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 660 nm I
F=20mA
λD [1] Dominant Wavelength Super Bright Red 640 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Super Bright Red 20 nm I
F=20mA
C Capacitance Super Bright Red 45 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA
I
R Reverse Current Super Bright Red 10 uA VR=5V
Parameter Super Bright Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
