ADL5350
Rev. 0 | Page 4 of 24
SPUR TABLES
All spur tables are (N × f
RF
) − (M × f
LO
) mixer spurious products for 0 dBm input power, unless otherwise noted. N.M. indicates that a
spur was not measured due to it being at a frequency >6 GHz.
850 MHz SPUR TABLE
Table 3.
05615–068
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 –100 –20.6 –19.2 –15.3 –16.7 –38.4 –26.6 –22.1 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
1 –21.6 5.6 –23.6 –19.6 –31.9 –28.7 –46.1 –48.5 –33.2 N.M. N.M. N.M. N.M. N.M. N.M. N.M.
2 –50.0 69.2 –50.5 –59.8 –49.1 –57.5 –51.0 –77.7 –65.8 –60.8 N.M. N.M. N.M. N.M. N.M. N.M.
3 –74.8 66.0 –71.8 –68.1 –70.2 –67.4 –66.9 –70.8 –85.2 –87.3 –72.2 N.M. N.M. N.M. N.M. N.M.
4 –100 –92.6 –91.6 –96.1 –92.7 –98.7 –90.2 –91.7 –88.8 –100 –100 –91.7 –88.6 N.M. N.M. N.M.
5 –100 –100 –100 –100 –100 –100 –100 –100 –99.5 –100 –100 –100 –100 –100 N.M. N.M.
6 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 N.M.
7 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
8 N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
9 N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
10 N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
11 N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
12 N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100 –100
13 N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100 –100
14 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 –100
15 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100
M
N
1950 MHz SPUR TABLE
Table 4.
05615–069
M
N
0123456789101112131415
0 –100 –13.1 –32.8 –22.4 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
1 –10.8 –7.0 –25.3 –27.7 –33.9 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
2 –48.2 –61.2 –41.2 –44.6 –47.0 –74.6 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
3 –72.3 –71.4 –83.6 –64.5 –62.4 –64.3 –83.7 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
4 N.M. N.M. –91.4 –84.2 –78.3 –76.5 –80.0 –92.0 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M.
5 N.M. N.M. N.M. –90.8 –82.3 –77.1 –79.5 –83.8 –95.2 N.M. N.M. N.M. N.M. N.M. N.M. N.M.
6 N.M.N.M.N.M.N.M.–100 –100 –93.4 –94.5 –100 –99.2 –100 N.M. N.M. N.M. N.M. N.M.
7 N.M.N.M.N.M.N.M.N.M.–100 –100 –94.0 –96.4 –100 –100 –100 N.M. N.M. N.M. N.M.
8 N.M.N.M.N.M.N.M.N.M.N.M.–100 –100 –100 –100 –100 –100 –100 N.M. N.M. N.M.
9 N.M.N.M.N.M.N.M.N.M.N.M.N.M.–100 –100 –100 –100 –100 –100 –100 N.M. N.M.
10 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100 N.M.
11 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100 –100
12 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100 –100
13 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100 –100 –100
14 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100 –100
15 N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. N.M. –100 –100
ADL5350
Rev. 0 | Page 5 of 24
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter Rating
Supply Voltage, V
S
4.0 V
RF Input Level 23 dBm
LO Input Level 20 dBm
Internal Power Dissipation 324 mW
θ
JA
154.3°C/W
Maximum Junction Temperature 135°C
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ADL5350
Rev. 0 | Page 6 of 24
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1RF/IF
2GND2
3LOIN
4NC
8 RF/IF
7NC
6 VPOS
5 GND1
ADL5350
TOP VIEW
(Not to Scale)
NC = NO CONNECT
05615-002
Figure 2. Pin Configuration
Table 6. Pin Function Descriptions
Pin No. Mnemonic Description
1, 8 RF/IF
RF and IF Input/Output Ports. These nodes are internally tied together. RF and IF port separation is
achieved using external tuning networks.
2, 5, Paddle GND2, GND1, GND Device Common (DC Ground).
3 LOIN LO Input. Needs to be ac-coupled.
4, 7 NC No Connect. Grounding NC pins is recommended.
6 VPOS
Positive Supply Voltage for the Drain of the LO Buffer. A series RF choke is needed on the supply line
to provide proper ac loading of the LO buffer amplifier.

ADL5350ACPZ-R7

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
RF Mixer Single Ended Passive Mixer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet