CMOSIS takes care to ensure the accuracy of the information contained in this document but reserves the right to change specifications without notice.
Page 1/2
PRODUCT SHEET
ORION LINE SCAN
LINE SCAN SENSORS
Orion is a digital high
speed line scan sensor
with configurable photo-
diode size. Over the SPI
interface the photo-diode size can be configured
to a 10μm x 10μm size or 10μm x 200μm size.
Independently form the photo-diode the
conversion capacitance can be configured over
SPI interface. The larger conversion capacitance,
resulting in a full well capacity of 300ke- results in
outstandingly high SNR. The smaller conversion
capacitance, resulting in a full well capacity of
30ke- results in very high sensitivity, ideal for high
speed scanning applications or detecting
extremely low signal levels. The high aspect ratio
photo-diode makes the Orion sensors ideal for
spectrometric and OCT applications where the
light is gathered over a wide area.
Please note that we offer today only engineering
samples, production ramp up is expected towards
Q3 2017. For pricing and lead time please contact
ISS.CIS_info@ams.com.
SPECIFICATIONS
Resolution 2k
Pixel size 10 x 10 and 10 x 200
Shutter type Global shutter
Frame rate 60k scan/s
Output interface 11/ 13 bit
Sensitivity
113 DN/nJ/cm2 @12bit (10 x 10
um2 pixel) and 211 DN/nJ/cm2
@12bit (10 x 200 um2 pixel)
Conversion gain
0.248 DN/e (13 bit)(Big Well) |
0.022 DN/e (13 bit) (Small Well)
Full well charge
30k e- (10 x 10 um2 pixel) and
300k e- (10 x 200 um2 pixel)
Dark noise 2.05 DN
Dynamic range
59.15 dB (10 x 10 um2 pixel) and
59.44 dB (10 x 200 um2 pixel)
Fixed pattern noise DSNU: 6 [DN] PRNU: 1%
Chroma Mono
Supply voltage 3.3 V
Power 500 mw per 2K segment
Operating temperature range 0ºC – 50 ºC
RoHS compliance Yes
Socket
Andon Electronics
(http://www.andonelectronics.com)
Orion 2K Ceramic LCC: 694-76-SM-
G10-L14-1
