https://www.phoenixcontact.com/us/products/2903340
3/7/14Page2/6
Relay Module-RIF-1-RPT-LV-120AC/1X21-2903340
Technical data
Coil side
Protective circuit Varistor
Contact side
Contact type 1 PDT
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (at 10 mA)
Maximum inrush current 25 A (20 ms, N/O contact)
Min. switching current 10 mA (at 12 V)
Limiting continuous current 10 A (see diagram)
Interrupting rating (ohmic load) max. 240 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
2500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (24 V (DC13))
6 A (230 V (AC 15))
Connection data
Connection method Push-in connection
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 16
Stripping length 8 mm
General
Type of note Notes on operation
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in
bridge for the output side (11/21)
Test voltage relay winding/relay contact
4 kV
rms
(50 Hz, 1 min.)
Operating mode 100% operating factor