https://www.phoenixcontact.com/pi/products/1584347
08/18/2018Page1/4
Contact insert-HC-D 7-I-CT-F-1584347
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Contact insert, number of positions: 7+PE, size: D7, number of connections per position: 1, Socket, Crimp
connection, 250V, 10 A, 0.14 mm²...2.5 mm², Only suitable for plastic housings
Why buy this product
Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3.
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4046356142601
Technical data
General
Note
For HC-D7 housing, crimp contacts CK1,6-ED (crimp contacts not
included in scope of supply)
Connection method Crimp connection
Number of connections per position 1
Degree of pollution 3
Overvoltage category III
Number of positions 7+PE
Insertion/withdrawal cycles ≥ 500
Size D7
Contact numbering 1 - 7
Conductor cross section 0.14 mm² ... 2.5 mm²
Connection cross section AWG 26 ... 14
Stripping length of the individual wire 8 mm (0.14...1.5mm²)
6 mm (2.5 mm²)
Assembly instructions Connectors may be operated only when there is no load/voltage.