BSC9131NXE1KHKB

A new dimension in wireless processing
Overview
The QorIQ Qonverge BSC9131 processor is
a highly integrated device that targets evolving
femto and enterprise femto applications. The
BSC9131 combines Power Architecture
®
e500
and StarCore SC3850 core technologies with
MAPLE-B2F baseband acceleration processing,
addressing the need for a high-performance,
cost-effective, integrated solution that handles
all the digital baseband processing required for
femtocells.
The programmable BSC9131 device, targeted at
LTE/FDD/TDD, WCDMA (HSPA+) and CDMA2K,
supports multiple air interface standards and can
support two concurrent standards.
QorIQ Qonverge BSC9130 and BSC9131 Processors
StarCore SC3850
DSP Core
512 KB
L2 Cache
DMA
USB
2.0
Security
Engine
V4.4
1x GE 1x GE
IEEE
®
1588
Ethernet
32 KB L1
I-Cache
Multicore Fabric
32 KB L1
D-Cache
32 KB
I-Cache
32 KB
D-Cache
MAPLE-B2F
Baseband
Accelerator
LTE/UMTS/CDMA2K
e500 Core
Built on
Power Architecture
®
32-bit
DDR3/3L
Memory
Controller
RF Interface
(JESD207/ADI)
and MaxPHY
256 KB
L2 Cache
Coherency
Module
4x eSPI
2x DUART
2x I
2
C
GPIO
USIM
IFC
eSDHC
2x PWM
Clocks/Reset
QorIQ Qonverge BSC9131 Processor
QorIQ Qonverge BSC9131 for
Femtocell Base Station Solutions
QorIQ Qonverge Platform
Target Applications
Femtocell: Home or small office cellular
base stations supporting the following
standards:
• LTE-FDD/TDD
• WCDMA(HSPA+)
• CDMA2K
• TD-SCDMA
Freescale, the Freescale logo, QorIQ and StarCore are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.
QorIQ Qonverge is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their
respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are
trademarks and service marks licensed by Power.org. © 2012 Freescale Semiconductor, Inc.
Document Number: QORIQPSC9131FS REV 2
For more information about the QorIQ Qonverge BSC913x family,
visit freescale.com/QorIQQonverge
Freescale will provide commercial L1 and
transport software. L2, L3 will be provided
through our partner stack vendors:
• LTE-FDD/TDDandWCDMA(HSPA+)L1
software–licensed by Freescale
• L2/L3softwareforLTE-FDD/TDDand
WCDMA (HSPA+)–via partners
• Developmenttoolsandoperatingsystem
software through Freescale and its
ecosystem partners
QorIQ Qonverge Features
The BSC9131 is a highly integrated device combining Power, StarCore
and MAPLE architectures. The device includes the following features:
Core
• PowerArchitecture
®
subsystem including one e500 processor and 256 KB shared
L2 cache
DSP
• StarCoreSC3850DSPsubsystemincluding512KBprivateL2cache
Baseband
Acceleration
• MAPLE-B2Fmulti-acceleratorplatformenginesupportsfunctionsthatenable
LTE-FDD/TDD, WCDMA (HSPA+) and CDMA2K wireless standards
Memory
• DDR3memoryinterfacewith32-bitdatawidth(40bitsincludingECC),upto
800 MHz data rate
• IntegratedflashcontrollerforNOR,NANDandFPGAsupport
Security
• Dedicatedsecurityenginefeaturingtrustedboot
RF Interface
• AntennainterfacecontrollersupportingthreeindustrystandardJESD207/three
customADIRFinterfaces(twodualportandonesingleport)
• Twopulsewidthmodulators(PWM)forcontrolofexternalcomponents
• ThreeMAXIMsMaxPhyserialinterfaces
Connectivity
• Twotriple-speedGigabit-Ethernetcontrollersfeaturingnetworkaccelerationincluding
IEEE
®
Std 1588v2™ hardware support
• USB2.0hostanddevicecontroller
• DMAcontrollerwithfourbidirectionalchannelsthatservesbothPowerArchitecture
cores and DSP domains
• UART,SPI,eSDHC,USIMandI
2
C controllers
• GPIO,1632-bittimers
BSC9131 Reference Design Board

BSC9131NXE1KHKB

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Microprocessors - MPU DSP, STARCORE 2 CORE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union