4
DS8555-01 August 2016www.richtek.com
RT8555
©
Copyright 2016 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Electrical Characteristics
Recommended Operating Conditions
(Note 4)
Junction Temperature Range--------------------------------------------------------------------------------------------- 40°C to 125°C
Ambient Temperature Range--------------------------------------------------------------------------------------------- 40°C to 85°C
Parameter Symbol Test Conditions Min Typ Max Unit
Input Power Supply
Input Supply Voltage V
IN
2.7 3.8 24 V
Quiescent Current I
Q
LX no switching -- 2.7 -- mA
Shutdown Current I
SHDN
V
IN
= 3.8V, EN = 0V -- -- 1 A
Under-Voltage Lockout Threshold V
UVLO
V
IN
Rising -- 2.3 -- V
Under-Voltage Lockout Hysteresis V
UVLO
-- 200 -- mV
Over-Temperature Protection
Threshold
T
OTP
-- 150 -- C
Over-Temperature Protection
Hysteresis
T
OTP_HYS
-- 20 -- C
Interface Characteristic
EN, PWM, SCL, SDA
Input Voltage
Logic-High V
IH
1.4 -- -- V
Logic-Low V
IL
-- -- 0.8 V
Internal Pull-Low Current for EN,
PWM
I
IH_1
-- -- 10 A
Internal Pull-Low Current for SCL,
SDA
I
IH_2
-- 0.01 1 A
Output Low Level for SDA V
OL
External Pull High Current = 3mA -- 0.3 0.5 V
Output Leakage Current for SDA I
LK_DIO
SDA Pin Voltage = 3.3V -- -- 1 A
I
2
C Interface Timing
Maximum I
2
C Clock Frequency f
SC_MAX
-- 400 -- kHz
Absolute Maximum Ratings (Note 1)
Supply Voltage, VIN to GND --------------------------------------------------------------------------------------------- 0.3V to 26.4V
LX, VOUT, FB1, FB2, FB3, FB4, FB5, FB6 to GND --------------------------------------------------------------- 0.3V to 40V
EN, PWM, SDA, SCL, VCP to GND----------------------------------------------------------------------------------- 0.3V to 6V
Power Dissipation, P
D
@ T
A
= 25°C
WL-CSP-20B 1.65 x 2.05 (BSC) --------------------------------------------------------------------------------------- 2.72W
Package Thermal Resistance (Note 2)
WL-CSP-20B 1.65 x 2.05 (BSC), θ
JA
---------------------------------------------------------------------------------- 36.7°C/W
Junction Temperature ------------------------------------------------------------------------------------------------------ 150°C
Lead Temperature (Soldering, 10 sec.)-------------------------------------------------------------------------------- 260°C
Storage Temperature Range --------------------------------------------------------------------------------------------- 65°C to 150°C
ESD Susceptibility (Note 3)
HBM (Human Body Model)----------------------------------------------------------------------------------------------- 2kV
MM (Machine Model) ------------------------------------------------------------------------------------------------------ 200V
(V
IN
= 3.8V, C
IN
= 1μF, T
A
= 25°C, unless otherwise specified)
5
DS8555-01 August 2016 www.richtek.com
RT8555
©
Copyright 2016 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Parameter Symbol Test Conditions Min Typ Max Unit
Hold Time for START And
Repeated START Condition
t
HD,STA
0.6 -- -- s
SCL Clock Low Time t
LOW
1.3 -- -- s
SCL Clock High Time t
HIGH
600 -- -- ns
Setup Time for A Repeated
START Condition
t
SU,STA
600 -- -- ns
SDA Data Hold Time t
HD,DAT
50 -- -- ns
SDA Data Setup Time t
SU,DAT
100 -- -- ns
Rising Time of SDA, SCL t
R
-- -- 300 ns
Falling Time of SDA, SCL t
F
-- -- 300 ns
Setup Time for STOP Condition t
SU,STO
600 -- -- ns
I
2
C Bus Free Time Between a
STOP and a START
t
BUF
1.3 -- -- s
Capacitive Load for I
2
C Bus C
B
-- -- 400 pF
Boost Converter
Switching Frequency Accuracy f
SW_ACC
Boost Operates at PWM Mode,
f
SW
= 600kHz
10 -- 10 %
Switching Frequency Setting
Range
f
SW_RG
Boost Operates at PWM Mode 0.3 -- 2 MHz
Maximum Duty Cycle D
MAX
f
SW
= 600kHz -- 95 -- %
Boost Switch R
DS(ON)
R
DS(ON)
-- 0.1 0.3
Switching Current Limitation I
OCP
2 2.5 3 A
LED Current
Leakage Current of FBx I
LK_FB
V
FBx
= 36V, I
FBx
= 0mA -- -- 1 A
Minimum FBx Regulation Voltage V
FB(MIN)
I
FBx
= 20mA 0.3 -- -- V
Maximum LED Current Setting I
FB(MAX)
LED 100% Setting 10 -- 35 mA
Minimum LED Current Setting I
FB(MIN)
Setting By Dimming 0.2 -- -- mA
LED Current Accuracy I
FB_ACC
PWM Duty = 100%, I
FBx
= 20mA 3 -- 3 %
LED Current Matching I
FB_MAT
PWM Duty = 100%, I
FBx
= 20mA 2 -- 2 %
FBx Channel Unused Threshold V
FB_UNUSE
-- 0.1 -- V
Light Bar Open Threshold V
FB_OPEN
-- 0.1 -- V
PWM Minimum On Duty D
PWM_MIN
PWM Dimming Frequency = 20kHz 0.8 -- -- %
Note 1. Stresses beyond those listed Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may
affect device reliability.
Note 2. θ
JA
is measured at T
A
= 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
6
DS8555-01 August 2016www.richtek.com
RT8555
©
Copyright 2016 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Typical Application Circuit
FB1
FB2
FB3
VCP VOUT
VIN
2.7V to 24V
FB4
L1
D1
C4
D2
E3
D4
E4
RT8555
:
:
:
:
:
:
:
:
:
:
:
:
C
OUT
LX
A1, B1
GND
C3, D3
C1, D1
C1
C2
:
:
:
:
:
:
FB5
E2
FB6
E1
PGND
A2, B2
C
CP
EN
B4
PWM
B3
SCL
A4
SDA
A3
MCU
V
IN
R1
C
IN
6.8µH
10
4.7µF
1µF
1µF
6.8µF
Note : For unused channels (FBx), please connect FBx pin to GND.

RT8555AWSC

Mfr. #:
Manufacturer:
Description:
IC LED DRVR REG PWM 20WLCSP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet