ACPL-M61T-500 Datasheet ACPL-M61T-000E, ACPL-M61T-500E, ACPL-M61T-560E | P1-P3

ACPL-M61T

10MBd Wide Operating Temperature Automotive Digital Optocoupler

with R

Coupler™ Isolation and AEC-Q100 Qualication

Data Sheet

Features

x High Temperature and Reliability CANBus communic-

ation interface for Automotive Application.

x 15 kV/Ps High Common-Mode Rejection at V

= 1000 V

x Compact, Auto-Insertable SO5 Packages

x Wide Temperature Range: -40°C ~ 125°C

x High Speed: 10MBd (Typical)

x Low LED Drive Current: 6.5mA (typ)

x Low Propagation Delay: 100ns (max)

x Worldwide Safety Approval:

− UL 1577, 4000 Vrms/1 min.

− CSA File CA88324, Notice #5

− IEC/EN/DIN EN 60747-5-2 Approved

x Qualied to AEC-Q100 Test Guidelines

Applications

x Automotive CANBus Communications Interface

x High Temperature Digital Signal Isolation

x Micro-controller Interface

x Digital isolation for A/D, D/A conversion

Description

This small outline wide operating temperature, high

CMR, high speed, logic gate optocoupler is a single

channel device in a ve lead miniature footprint.

The ACPL-M61T optically coupled gates combine a

AlGaAs light emitting diode and an integrated high

gain photo detector. The output of the detector IC is an

Open-collector Schottky-clamped transistor. The internal

shield provides a guaranteed common mode transient

immunity specication of 15,000 V/µs at V

=1000V.

This optocoupler is suitable for use in automotive high

speed communications logic interfacing with low propa-

gation delays, input/output buering and is recommend-

ed for use in high operating temperature environment.

This unique design provides maximum AC and DC circuit

isolation while achieving TTL compatibility. The optocou-

pler AC and DC operational parameters are guaranteed

from -40°C to 125°C.

Avago R

Coupler isolation products provide the rein-

forced insulation and reliability needed for critical in au-

tomotive and high temperature industrial applications.

Functional Diagram

GND

ANODE

CATHODE

CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation which may be induced by ESD.

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

Schematic

8.27

(0.325)

2.0

(0.080)

2.5

(0.10)

1.3

(0.05)

0.64

(0.025)

4.4

(0.17)

Land Pattern Recommendation

Ordering Information

Part Number

Option

Package

Surface

Mount

Tape

& Reel

IEC/EN/DIN EN

60747-5-2 Quantity(RoHS) Compliant

ACPL-M61T -000E SO-5 X 100 per tube

-060E X X 100 per tube

-500E X X 1500 per reel

-560E X X X 1500 per reel

To order, choose a part number from the part number column and combine with the desired option from the option

column to form an order entry.

Example 1:

ACPL-M61T-500E to order product of Mini-at Surface Mount 5-pin package in Tape and Reel packaging with RoHS

compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Package Outline Drawings

ACPL-M61T Small Outline SO-5 Package (JEDEC MO-155)

M61T

YWW

7.0 ± 0.2

(0.276 ± 0.008)

2.5 ± 0.1

(0.098 ± 0.004)

0.102 ± 0.102

(0.004 ± 0.004)

4.4 ± 0.1

(0.173 ± 0.004)

1.27

(0.050)

BSC

0.20 ± 0.025

(0.008 ± 0.001)

0.71

(0.028)

MIN.

0.4 ± 0.05

(0.016 ± 0.002)

3.6 ± 0.1*

(0.142 ± 0.004)

DIMENSIONS IN MILLIMETERS (INCHES)

* MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006)

NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.

MAX.

MAX. LEAD COPLANARITY

= 0.102 (0.004)

Extended Datecode

for lot tracking

SHIELD

USE OF A 0.1 μF BYPASS CAPACITOR

MUST BE CONNECTED BETWEEN PINS

6 AND 4 (SEE NOTE 1).

GND

TRUTH TABLE

(POSITIVE LOGIC)

LED

OFF

OUTPUT

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics*

Description Symbol Characteristic Unit

Installation classication per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 V

rms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 V

rms

I – IV

I – III

I – II

Climatic Classication 55/125/21

Pollution Degree (DIN VDE 0110/1.89) 2

Maximum Working Insulation Voltage V

IORM

567 V

peak

Input to Output Test Voltage, Method b*

IORM

x 1.875=V

, 100% Production Test with t

=1 sec, Partial discharge < 5 pC

1063 V

peak

Input to Output Test Voltage, Method a*

IORM

x 1.6=V

, Type and Sample Test, t

=10 sec, Partial discharge < 5 pC

907 V

peak

Highest Allowable Overvoltage (Transient Overvoltage t

ini

= 60 sec) V

IOTM

6000 V

peak

Safety-limiting values – maximum values allowed in the event of a failure.

Case Temperature

Input Current

Output Power

S, INPUT

S, OUTPUT

175

230

600

°C

Insulation Resistance at T

, V

= 500 V R

>10

* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/

DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test proles.

Insulation and Safety Related Specications

Parameter Symbol ACPL-M61T Units Conditions

Minimum External Air

Gap (Clearance)

L(101) ≥ 5 mm Measured from input terminals to output terminals, shortest distance

through air.

Minimum External

Tracking (Creepage)

L(102) ≥ 5 mm Measured from input terminals to output terminals, shortest distance

path along body.

Minimum Internal Plastic

Gap (Internal Clearance)

0.08 mm Through insulation distance conductor to conductor, usually the

straight line distance thickness between the emitter and detector.

Tracking Resistance

(Comparative Tracking

Index)

CTI 175 V DIN IEC 112/VDE 0303 Part 1

Isolation Group

(DIN VDE0109)

IIIa Material Group (DIN VDE 0109)

Regulatory Information

The ACPL-M61T is approved by the following organizations:

Recommended Pb-Free IR Prole

Recommended reow condition as per JEDEC Standard, J-STD-020 (latest revision).

Note: Non-halide ux should be used.

Approved under UL 1577, component recognition

program up to V

ISO

= 4000 V

RMS

CSA

Approved under CSA Component Acceptance Notice #5.

IEC/EN/DIN EN 60747-5-2

Approved under:

IEC 60747-5-2:1997 + A1

EN 60747-5-2:2001 + A1

DIN EN 60747-5-2 (VDE 0884 Teil 2)

P1-P3 P4-P6 P7-P9 P10-P10

ACPL-M61T-500

Mfr. #:

Buy ACPL-M61T-500

Manufacturer:

Broadcom / Avago

Description:

High Speed Optocouplers 10MBd 15k V/us

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ACPL-M61T-500

ACPL-M61T-500

Products related to this Datasheet