OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EVP-AT2G1B000

P1-P3
1 2 345678910 (11) (12)
Product Code Type
Note: Non washable
■ Specifications
Type Snap action/Push-on type SPST
Electrical
Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load)
Contact Resistance 500 mΩ max.
Insulation Resistance 50 MΩ min. (at 100 V DC)
Dielectric Withstanding Voltage 250 V AC for 1 minute
Bouncing 10 ms max. (ON, OFF)
Mechanical
Operating Force 1.6 N
Travel 0.11 mm
Endurance Operating Life 500,000 cycles
Operating Temperature –40 °C to +85 °C
Storage Temperature
–40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Minimum Quantity/Packing Unit 10,000 pcs. Embossed
Taping (Reel Pack)
Quantity/Carton 50,000 pcs.
■ Features
● External dimensions : 3.4 mm
×
1.7mm(Excludingthepushplate),
Height1.6mm(Printedcircuitboardbeingaslowas1.105mm)
● High operability
Equipped with an actuator (push plate)
● IP67
■ Explanation of Part Numbers
3.4 mm×1.7 mm Side-operational Edge-mount
Light Touch Switches
Type:
EVPAT
■ Recommended Applications
● Operation switches for portable electronic equipment
(Mobile phones, Digital still c
ameras,
Camcorders Portable audio players, etc.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ANCTB25E 201705-Fd
 
Panasonic Corporation 2017
–1–
industrial.panasonic.com/ac/e/
201 7.05
Light Touch Switches/EVPAT
Operating
Force
G1B0 0 0
Partly to Be Discontinued
Last time buy:May 31, 2017
ANCTB22JE25JE.indd 7 17/06/06 9:56
(φ0.7)
(φ0.91)
Actuator cross section (Section C-C)
A
B
0.2±0.05
4.6±0.05
2.7±0.05
0.84±0.05
1
+0.1
0
1.4±0.05
1.14±0.05
1.54±0.05
1±0.05
2.2±0.05
3.4±0.05
<Back View>
Push plate side
Edge of PCB
Circuit diagram
2-0.15±0.05
C
C
3.4
(Without the remainder of the
molding gate)
(4.2)
1.73
(1.9)
Molding Gate
b
a
(2.86)
0.34±0.05 0.34±0.05
A
B
0.28
0.56
1.34
0.08±0.05
1.105
1.65
General dimension tolerance : ± 0.1
( )dimensions are reference dimensions.
This reference specifications are subject to change.
Land pattern plan
Soldering thicknes t=0.12±0.02
Part Numbers Operating Force Height Operating Life
EVPAT2G1B000 1.6 N
1.105
mm 500,000 cycles
■ Dimensions in mm (not to scale)
EVPAT
(
Embossed Taping)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ANCTB25E 201705-Fd
 
Panasonic Corporation 2017
Panasonic Corporation
Electromechanical Control Business Division
–2–
industrial.panasonic.com/ac/e/
Light Touch Switches/EVPAT
ANCTB22JE25JE.indd 8 17/06/06 9:56
Soldering Time (s)
Reflow temperature may vary by location even in the same reflow condition.
Please check the reflow temperature at terminals and at the top of a switch
to make sure the both temperatures are withiin the specification.
If even one of them is out of the specifi cations, please adjust.
(Normal Temp.)
Fan or Normal Temp.
180
Operation Top (°C)
260
MAX.
150
90±30
40±10
230
D F
A
B
C
M
E
φ
1. 5
H
I
K
L
t
J
Tape width=12.0 mm (A=12.0 mm)
Tape running direction
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1.0N at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
● Embossed Carrier Taping
■ Recommended Reflow Soldering Conditions
Unit: mm
Part No.HeightABCDEFGH I JKL J t
EVPAT 1.105 12.0±0.2
1.75±0.10 5.50±0.05
4.0±0.1 4.0±0.1
2.00±0.05
1.5
+0.1
2.28±0.20
4.8±0.2 (1.065)
1.23±0.10 0.77±0.10
(10.25)
0.30±0.05
-0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ANCTB25E 201705-Fd
 
Panasonic Corporation 2017
Panasonic Corporation
Electromechanical Control Business Division
–3–
industrial.panasonic.com/ac/e/
Light Touch Switches/EVPAT
ANCTB22JE25JE.indd 9 17/06/06 9:56
P1-P3

EVP-AT2G1B000

Mfr. #:
Buy EVP-AT2G1B000
Manufacturer:
Panasonic
Description:
SWITCH TACTILE SPST-NO 0.02A 15V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet