OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ASMT-QWBC-NHJ0E

P1-P3P4-P6P7-P9P10-P10
7
Figure 15. Tape Leader and Trailer Dimensions
200 mm MIN. FOR Ø180 REEL.
200 mm MIN. FOR Ø330 REEL.
TRAILER COMPONENT LEADER
480 mm MIN. FOR Ø180 REEL.
960 mm MIN. FOR Ø330 REEL.
C
A
USER FEED DIRECTION
Figure 16. Tape Dimensions
CATHODE SIDE
USER FEED DIRECTION
PRINTED LABEL
Figure 17. Reeling Orientation
3.8 ± 0.1
2.29 ± 0.1
0.229 ± 0.01
ALL DIMENSIONS IN mm.
2 ± 0.054 ± 0.1
4 ± 0.1
3.05 ± 0.1
3.5 ± 0.05
8
+0.3
–0.1
1.75 ± 0.1
Ø1.5
+0.1
–0
8°
Ø1
+0.1
–0
A A
C C
8
Device Color (X
1
)
W Cool White
Flux Bin Select (X
2
X
3
)
Individual reel will contain parts from one bin only
X
2
Min Flux Bin
X
3
Max Flux Bin
Flux Bin Limits
Bin ID Min. (lm) Max. (lm)
0 3.40 4.30
A 4.30 5.50
B 5.50 7.00
C 7.00 9.00
D 9.00 11.50
E 11.50 15.00
F 15.00 19.50
G 19.50 25.50
H 25.50 33.00
J 33.00 43.00
K 43.00 56.00
L 56.00 73.00
Tolerance of each bin limit = ± 12%
Color Bin Select (X
4
)
Individual reel will contain parts from one sub bin only.
X
4
0 Full Distribution
A 5K and 5L only
B 6K and 6L only
C 7K and 7L only
D 8K and 8L only
E 5K and 6K only
F 5L and 6L only
G 6K and 7K only
H 6L and 7L only
J 7K and 8K only
K 7L and 8L only
L 5K, 5L, 6K and 6L only
M 6K, 6L, 7K and 7L only
N 7K, 7L, 8K and 8L only
P 5L only
Q 6L only
R 7L only
S 8L only
Handling Precaution
The encapsulation material of the product is made of sili-
cone for better reliability of the product. As silicone is a
soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly or
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail infor-
mation.
Moisture Sensitivity
This product is qualied as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the HIC indicates that
baking is not required, then it is safe to reow the
LEDs per the original MSL rating.
- It is not recommended to open the MBB prior to
assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
C. Control for unnished reel
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their oor life of 672 hours.
E. Baking is required if:
- The HIC indicator is not GREEN at 10% and is AZURE
at 5%
- The LEDs are exposed to condition of >30°C / 60%
RH at any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5ºC for 20hrs
F. Use of LED
– Do not use materials that contain corrosive
substance such as sulfur with the LED during
assembly process and application. Silicone is
permeable for gases, corrosive gases will permeate
into the LED and corrode the leadframe plating
result in open contact.
9
Color Bin Limits
Bin
ID
Sub Bin
ID Limits (Chromaticity Coordinates)
5K 5Ka x 0.296 0.304 0.302 0.294
y 0.259 0.270 0.276 0.264
5Kb x 0.294 0.302 0.300 0.291
y 0.264 0.276 0.281 0.268
5Kc x 0.304 0.313 0.312 0.302
y 0.270 0.284 0.291 0.276
5Kd x 0.302 0.312 0.310 0.300
y 0.276 0.291 0.297 0.281
5L 5La x 0.291 0.300 0.298 0.288
y 0.268 0.281 0.288 0.274
5Lb x 0.288 0.298 0.295 0.285
y 0.274 0.288 0.294 0.279
5Lc x 0.300 0.310 0.309 0.298
y 0.281 0.297 0.305 0.288
5Ld x 0.298 0.309 0.307 0.295
y 0.288 0.305 0.312 0.294
6K 6Ka x 0.313 0.322 0.321 0.312
y 0.284 0.297 0.305 0.291
6Kb x 0.312 0.321 0.320 0.310
y 0.291 0.305 0.314 0.297
6Kc x 0.322 0.330 0.330 0.321
y 0.297 0.310 0.320 0.305
6Kd x 0.321 0.330 0.330 0.320
y 0.305 0.320 0.330 0.314
6L 6La x 0.310 0.320 0.319 0.309
y 0.297 0.314 0.322 0.305
6Lb x 0.309 0.319 0.318 0.307
y 0.305 0.322 0.329 0.312
6Lc x 0.320 0.330 0.330 0.319
y 0.314 0.330 0.339 0.322
6Ld x 0.319 0.330 0.330 0.318
y 0.322 0.339 0.347 0.329
Bin
ID
Sub Bin
ID Limits (Chromaticity Coordinates)
7K 7Ka x 0.330 0.336 0.337 0.330
y 0.310 0.320 0.330 0.320
7Kb x 0.330 0.337 0.337 0.330
y 0.320 0.330 0.341 0.330
7Kc x 0.336 0.343 0.344 0.337
y 0.320 0.331 0.341 0.330
7Kd x 0.337 0.344 0.345 0.337
y 0.330 0.341 0.352 0.341
7L 7La x 0.330 0.337 0.337 0.330
y 0.330 0.341 0.349 0.339
7Lb x 0.330 0.337 0.338 0.330
y 0.339 0.349 0.358 0.347
7Lc x 0.337 0.345 0.346 0.337
y 0.341 0.352 0.362 0.349
7Ld x 0.337 0.346 0.347 0.338
y 0.349 0.362 0.371 0.358
8K 8Ka x 0.343 0.351 0.352 0.344
y 0.331 0.343 0.354 0.341
8Kb x 0.344 0.352 0.354 0.345
y 0.341 0.354 0.364 0.352
8Kc x 0.351 0.360 0.362 0.352
y 0.343 0.357 0.369 0.354
8Kd x 0.352 0.362 0.364 0.354
y 0.354 0.369 0.380 0.364
8L 8La x 0.345 0.354 0.355 0.346
y 0.352 0.364 0.375 0.362
8Lb x 0.346 0.355 0.356 0.347
y 0.362 0.375 0.385 0.371
8Lc x 0.354 0.364 0.366 0.355
y 0.364 0.380 0.391 0.375
8Ld x 0.355 0.366 0.367 0.356
y 0.375 0.391 0.401 0.385
Tolerance of each bin limit = ±0.01
P1-P3P4-P6P7-P9P10-P10

ASMT-QWBC-NHJ0E

Mfr. #:
Buy ASMT-QWBC-NHJ0E
Manufacturer:
Broadcom / Avago
Description:
High Power LEDs - White Cool White 0.5 Watt
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet