OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAATCC0009

P1-P3P4-P6P7-P7
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz
Rev. V5
MAATCC0009
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• Attenuation: 0.5 dB Steps to 31.5 dB
• Low DC Power Consumption
• Small Footprint, JEDEC Package
• Integral TTL Driver
• 50 ohm Impedance
• Test Boards are Available
• Tape and Reel Packaging Available
• Lead-Free CSP-1 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of AT90-0107
Description
M/A-COM's MAATCC0009 is a GaAs FET 6-bit
digital attenuator with integral TTL driver. Step size
is 0.5 dB providing a 31.5 dB total attenuation range.
This device is in an PQFN plastic surface mount
package. The MAATCC0009 is ideally suited for use
where accuracy, fast speed, very low power
consumption and low costs are required.
Ordering Information
Part Number Package
MAATCC0009 Bulk Packaging
MAATCC0009TR 1000 piece reel
MAATCC0009-TB Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Schematic with Off-Chip Components
Pin Configuration
2
Pin No. Function Pin No. Function
1 C8 17 NC
2 C4 18 NC
3 C2 19 NC
4 C1 20 NC
5 C0.5 21 NC
6 C16 22 NC
7 GND 23 NC
8 NC 24 NC
9 NC 25 NC
10 NC
1
26 GND
11 GND 27 RF2
12 RF1 28 GND
13 GND 29 NC
1
14 NC 30 -Vee
15 NC 31 NC
16 NC 32 +Vcc
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
1. Pins 10 & 29 must be isolated
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz
Rev. V5
MAATCC0009
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Electrical Specifications: T
A
= +25°C, Vee = -5 V ± 0.25 V, Vcc = +5 V ± 0.25 V
Parameter Frequency Units Min Typ Max
Insertion Loss DC - 4.0 GHz dB — 4.5 5.1
Attenuation Accuracy DC - 4.0 GHz
DC - 4.0 GHz
dB
dB
—
—
—
—
±(.3 +7% of atten setting)
±(.5 +8% of atten setting)
VSWR DC - 4.0 GHz Ratio — 2.0:1 2.2:1
Switching Speed
—
—
ns
ns
—
—
75
20
—
—
1 dB Compression 50 MHz
0.5 - 4.0 GHz
dBm
dBm
—
—
+21
+24
—
—
Input IP
3
50 MHz
0.5-4.0 GHz
dBm
dBm
—
—
+35
+48
—
—
V
IL
V
IH
—
—
V
V
0.0
2.0
—
—
0.8
5.0
lin (Input Leakage Current) — uA -1.0 — 1.0
Icc
(Quiescent Supply Current)
— uA — 250 400
Test Conditions
—
Individual Bits 0.5-1-2-4-8-16 dB
Any Combination of Bits
1 to 31.5 dB
Full Range
50% Cntl to 90%/10% RF
10% to 90% or 90% to 10%
—
—
Two-tone inputs up to +5 dBm
LOW-level input voltage
HIGH-level input voltage
Vin = V
CC
or GND
Vcntrl = V
CC
or GND
ΔIcc
(Additional Supply Current
Per TTL Input Pin)
V
CC
= Max, Vcntrl = V
CC
- 2.1 V — mA — — 1.0
IEE VEE min to max, Vin = V
IL
or V
IH
— mA -1.0 -0.2 —
Thermal Resistance θjc
— — °C/W — 15 —
Absolute Maximum Ratings
3,4
Parameter Absolute Maximum
Max. Input Power
0.05 GHz
0.5 - 4.0 GHz
+27 dBm
+34 dBm
V
CC
-0.5V ≤ V
CC
≤ +7.0V
V
EE
-8.5V ≤ V
EE
≤ +0.5V
V
CC
- V
EE
-0.5V ≤ V
CC
- V
EE
≤ 14.5V
Vin
5
-0.5V ≤ Vin ≤ V
CC
+ 0.5V
Operating Temperature -40ºC to +85ºC
Storage Temperature -65ºC to +125ºC
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
5. Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
Recommended PCB Configuration
6
6. Application Note S2083 is available on line at www.macom.com
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz
Rev. V5
MAATCC0009
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
VSWR @ Insertion Loss
Attenuation Error, 0.5 dB Bit
Attenuation Error, 1 dB Bit
Typical Performance Curves
Insertion Loss
2.0
3.0
4.0
5.0
6.0
0 1000 2000 3000 4000
Frequency (MHz)
Loss (dB)
1. 0
1. 3
1. 6
1. 9
2.2
0 1000 2000 3000 4000
Frequency (MHz)
VSWR
Input Output
-0.4
-0.2
0.0
0.2
0.4
0 1000 2000 3000 4000
Frequency (MHz)
Attenuation Error (dB)
-0.4
-0.2
0.0
0.2
0.4
0 1000 2000 3000 4000
Fre que ncy (MHz )
Attenuation Error (dB)
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Moisture Sensitivity
The MSL rating for this part is defined as Level 2
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 2 parts.
Truth Table (Digital Attenuator)
C16 C8 C4 C2
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 1
0 0 1 0
0 1 0 0
1 0 0 0
1 1 1 1
C1 C0.5 Attenuation
0 0 Loss, Reference
0 1 0.5 dB
1 0 1.0 dB
0 0 2.0 dB
0 0 4.0 dB
0 0 8.0 dB
0 0 16.0 dB
1 1 31.5 dB
0 = TTL Low; 1 = TTL High
P1-P3P4-P6P7-P7

MAATCC0009

Mfr. #:
Buy MAATCC0009
Manufacturer:
MACOM
Description:
Attenuators DC-4GHz 31.5dB .5dB steps 6-Bit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet