© Semiconductor Components Industries, LLC, 2016
July, 2016 − Rev. 8
1 Publication Order Number:
MC10E141/D
MC10E141
5 V ECL 8‐Bit Shift Register
Description
The MC10E/100E141 is an 8-bit full-function shift register. The
E141 performs serial/parallel in and serial/parallel out, shifting in
either direction. The eight inputs D
0
− D
7
accept parallel input data,
while DL/DR accept serial input data for left/right shifting. The Qn
outputs do not need to be terminated for the shift operation to function.
To minimize noise and power, any Q output not used should be left
unterminated.
The select pins, SEL0 and SEL1, select one of four modes of
operation: Load, Hold, Shift Left, Shift Right, according to the
Function Table.
Input data is accepted a set-up time before the positive clock edge. A
HIGH on the Master Reset (MR) pin asynchronously resets all the
registers to zero.
The 100 Series contains temperature compensation.
Features
• 700 MHz Min. Shift Frequency
• 8-Bit
• Full-Function, Bi-Directional
• Asynchronous Master Reset
• Pin-Compatible with E241
• PECL Mode Operating Range: V
CC
= 4.2 V to 5.7 V
with V
EE
= 0 V
• NECL Mode Operating Range: V
CC
= 0 V
with V
EE
= −4.2 V to −5.7 V
• Internal Input 50 kW Pulldown Resistors
• ESD Protection:
♦ > 2 kV Human Body Model
♦ > 200 V Machine Model
• Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
• Moisture Sensitivity: Level 3 (Pb-Free)
(For Additional Information, see Application Note AND8003/D
)
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 565 Devices
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
MARKING DIAGRAM*
xxx = 10
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb-Free Package
PLCC−28
FN SUFFIX
CASE 776−02
MCxxxE141FNG
AWLYYWW
1
www.onsemi.com
*For additional marking information, refer to
Application Note AND8002/D
.
ORDERING INFORMATION
Device Package Shipping†
MC10E141FNG PLCC−28
(Pb-Free)
37 Units / Tube
MC10E141FNR2G
500 Tape & Reel
PLCC−28
(Pb-Free)
†For information on tape and reel specifications, in-
cluding part orientation and tape sizes, please refer
to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D
.
