3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Header
2 mm 4/5 Row, Vertical, Press-Fit Tail MP2 Series
TS-1126-E
Sheet 3 of 4
Table 2 - Mate Length
Loading
Pattern
Code
Description Mate length Row A Mate length Row B Mate length Row C Mate length Row D
Mate length Row E
(5-Row Prod. Only)
1 All Positions Filled 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256]
2 All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256]
3 All Positions Filled 6.50 [0.256] 8.00 [0.315] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256]
4 All Positions Filled 6.50 [0.256] 7.25 [0.285] 7.25 [0.285] 8.00 [0.315] 8.00 [0.315]
5 All Positions Filled 7.25 [0.285] 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256]
6 All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315]
7 All Positions Filled 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285]
8 All Positions Filled 8.00 [0.315] 6.50 [0.256] 8.00 [0.315] 7.25 [0.285] 7.25 [0.285]
9 All Positions Filled 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256]
A All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285]
C All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 6.50 [0.256] 6.50 [0.256]
D All Positions Filled 8.00 [0.315] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256]
G All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 5.75 [0.226]
H All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 8.00 [0.315] 8.00 [0.315]
Table 1 - Connector & Row Lengths
Contact Count No. of Rows
08 4
10 5
Table 3 - Tail Length Options
Press-Fit* Tail Termination Option No. Dim. “A”
1 4.60 [0.181]
*Compliant-Pin Tail
Table 4 - Plating
Plating Suffix Plating Composition
KR
(RIA E1 & C1 apply)
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR
(RIA E1 & C1 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over