37103-A124-00E MB

3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M Mini-Clamp II Plug
2 mm, IDC, Wiremount 371 Series
Physical
Insulation
Material: Glass Reinforced Thermoplastic Body & Lower Cover, Transparent Thermoplastic Cover
Flammability: UL 94V-0
Color: Black Body, Cover – White & Color (see Table 1)
Contact
Material: Copper Alloy
Plating
Underplating: 1.27-2.54 μm [50-100 μ”] Nickel
Wiping Area: 0.2 μm [8 μ”] Minimum Gold with Lubricant
IDC:
2.0-7.62 μm [80-300 μ”] Matte Tin
Wire Accomodation: Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm
2
, 20-26 AWG
Wire Insulation: Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE
For approved cables contact your local sales representative
Marking: 3M Logo, Position Indicator, Wire Gauge, Insulator Material
Electrical
Current Rating: 3.0 Amps
Voltage Rating: 32 Volts
Insulation Resistance: >1x10
6
Ω at 600 V
DC
Withstanding Voltage: 1000 V
RMS
at Sea Level
Environmental
Temperature Ratings: -20
o
C to 85
o
C
UL File No: E68080
TS–2233-D
Sheet 1 of 2
Designed to accommodate typical wiring specifications
per Europe and North America suppliers.
Easy, quick and reliable IDC termination
Integrated cable retention
Design accepts multiple wire size diameter
No special tooling needed
Latch helps enable rugged field termination
Compact design saves board space
High number of mating cycles
RoHS compliant as declared in Regulatory
Information Appendix notes E1 & C1
Date Modified:3/10/2008
Designed for Wiring Supplied from Europe and North America
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M Mini-Clamp II Plug
2mm, IDC, Wiremount 371 Series
Ordering Information
371XX-XXXX-00E-MB
TS-2233-D
Sheet 2 of 2
Table 1
Wire OD 1.6 ~ 2.0
[.063~.079]
1.2 ~ 1.6
[.047~.063]
1.0 ~ 1.2
[.039~.047]
0.8 ~ 1.0
[.031~.039]
Part #
0.25-0.50 mm
2
20-24 AWG
Cover Color
A206
Gray
A165
Blue
A124
Green
Part #
0.14-0.25 mm
2
24-26 AWG
Cover Color
B163
Orange
B122
Yellow
B101
Red
mm
[inch]
Tolerance Unless
Noted
.0 .00
mm ±.1 ±.10
[ ] Dimensions for
Reference Only
Wire AWG & OD:
AXXX = 0.25-0.50 mm
2
20-24 AWG
BXXX = 0.14-0.25 mm
2
24-26 AWG
Wire OD – see Table 1
Positions
03 or 04
Note: Terminate using common pliers or 3M
TM
Scotchlok
TM
Crimping Tools E-9BM or E-9E
# Positions Dim A
3 12.9 [.51]
4 14.9 [.59]
Designed for Wiring Supplied from Europe and North America
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D

37103-A124-00E MB

Mfr. #:
Manufacturer:
3M
Description:
MINICLAMP PLUG FREE 3WAY GREEN, BG
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet