STEP
3
Connect Board to Computer
USB driver installation is a one-time
required step, to be completed after
CodeWarrior installation.
1. Connect provided A to B gray USB cable
from a free USB port on your computer to the
USB connector on the board.
2. Operating system will recognize your board
as new hardware and will prompt you to
install the USB drivers. Choose recommended
option to install the software automatically.
USB drivers for your board were pre-loaded in
CodeWarrior installation.
3. Follow on-screen instructions until all USB
driver installations are complete. The green
USB LED on-board should illuminate.
Install USB-LITE Stack
by CMX for MCF51JM128
USB-LITE stack by CMX for MCF51JM128
is a complimentary stack with the
appropriate JM128 USB OTG dual-mode
low-level drivers and top-level HID class
and CDC class examples. To exercise the
various USB examples packaged with the
stack follow the step-by-step EVB51JM128
Labs document (EVB51JM128LAB)
included in the “Training” section of the
DVD. Stack installation is a one-time
required step before developing with
this software.
1. Insert provided DVD into computer
and a menu will appear.
2. Click on “Install USB-LITE by CMX.”
This will launch the stack installer.
3. Follow on-screen instructions until
installation is complete.
The USB-LITE stack by CMX default
installed at C:\CMXUSB_LITE_V1.
For device function demo, HID and CDC
class software projects can be found at
C:\CMXUSB_LITE_V1\usb-peripheral\
projects\CodeWarrior-6.x\mcf51xx\
For host function demo, HID and mass
storage class software projects can be
found at C:\CMXUSB_LITE_V1\usb-host\
projects\CodeWarrior-6.x\mcf51xx\
For OTG function demo, the software
project can be found at C:\CMXUSB_LITE_
V1\usb-otg\projects\CodeWarrior-6.x\
mcf51xx\
STEP
2
EVB51JM128 Quick Start Guide
Step-by-step instructions
Install CodeWarrior
®
for
Microcontrollers and JM128
Service Pack
CodeWarrior is a powerful tool designed
to help you maximize your time to market.
CodeWarrior Service pack will install
the appropriate support files for the
MCF51JM128 to the existing CodeWarrior
installation. CodeWarrior installation is a
one-time required step before connecting
the board to your computer.
1. Insert provided DVD into computer
and a menu will appear.
2. Click on appropriate board and
“Install CodeWarrior.”
3. Follow the on-screen instructions until
installation is complete.
4. Return to DVD menu and click on
“Install JM128 Service Pack.”
5. Follow the on-screen instructions until
installation is complete.
Once installation is complete, take
advantage of several CodeWarrior
tutorials that will walk you through various
development tool features, such as
“C Programming,” “Assembly
Programming,” “Using Processor Expert™,”
and more. Simply open CodeWarrior via
the “Programs > Freescale CodeWarrior >
CW for Microcontroller V6.x > CodeWarrior
IDE.exe” path. Click “Run Getting Started
Tutorial” from the startup dialog, select
a tutorial and follow the on-screen
instructions.
STEP
1
EVB51JM128—Quick Start Guide
Freescale USB-LITE
Stack by CMX
Freescale is providing a
comprehensive USB software
solution through a complimentary
USB stack. The Freescale USB-LITE
stack by CMX enables all the JM
family products from 8-bit device
function and 32-bit OTG dual-modes
of operation. The USB stack supports
several HID (host and device mode),
CDC and mass storage projects.
The complimentary stack also
interfaces with CodeWarrior
Development Studio providing
a productive, comprehensive
development environment for
designing embedded applications.
