OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC194AMS8E

P1-P3P4-P5
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
3
HMC194AMS8 / 194AMS8E
v00.0812
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Absolute Maximum Ratings
Outline Drawing
RF Input Power (Vctl= 0V/+5V) +27 dBm
Control Voltage Range (A & B) -0.2 to +7.5 Vdc
Hot Switch Power Level (Vctl= 0V/+5V) +24 dBm
Channel Temperature 150 °C
Continuous Pdiss (T= 85 °C)
(derate 4.6 mW/°C above 85 °C)
300 mW
Thermal Resistance 216 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Note: DC blocking capacitors are required at ports RFC, RF1 and
RF2. Their value will determine the lowest transmission frequency.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC194AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H194A
XXXX
HMC194AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H194A
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
4
HMC194AMS8 / 194AMS8E
v00.0812
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Typical Application Circuit
Notes:
1. Set logic gate and switch Vdd = +3V to +5V and use HCT series
logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC)
with Vdd of 3 to 7 Volts applied to the CMOS logic gates.
3. DC Blocking capacitors are required for each RF port as shown.
Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is achieved with Control set to 0/+7V.
Evaluation Circuit Board
The circuit board used in the nal application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should
have 50 Ohm impedance and the package ground
leads should be connected directly to the ground
plane similar to that shown above. The evalua-
tion circuit board shown above is available from
Hittite Microwave Corporation upon request.
List of Materials for
Evaluation PCB 105143
[1]
Item Description
J1 - J3 PC Mount SMA RF Connector
J4 - J6 DC Pin
C1 - C3 100 pF capacitor, 0402 Pkg.
R1, R2
100
resistor, 0402 Pkg.
U1
HMC194AMS8 / 194AMS8E
SPDT Switch
PCB
[2]
107821 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P5

HMC194AMS8E

Mfr. #:
Buy HMC194AMS8E
Manufacturer:
Analog Devices / Hittite
Description:
RF Switch ICs SPDTSPDT Hi Iso Swt , DC - 3 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet