points are provided for connection to the facility earth ground. The removable front and rear doors feature
quick-release ground wires.
To simplify deployment, the SR42UW comes with preinstalled casters that enable it to be easily
maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note:
the casters are intended for minor position adjustments and are not designed for moving the enclosure
over long distances.
The SR42UW comes with a 5-year product warranty. As part of the SmartRack family, the SR42UW is
compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your
solution to meet any requirement.
Features
White version of our standard 42U rack enclosure offers easier visibility of installed equipment
●
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters
(casters are removable)
●
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and
convenient. The easy-view depth index ensures consistent rail placement without requiring time-
consuming measurements.
●
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible
PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern
compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
●
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
●
Textured powder coat finish for tough resistance to environmental concerns such as deployment in
warehouses.
●
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or
exceeds server manufacturer requirements.
●
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
●
Weight ratings of 3000 lb stationary and 2250 lb rolling.
●
Front door is locking, reversible and removable.
●
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for
service entry allowing the enclosure to be placed closer to a wall.
●
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of
installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the
front and rear doors.
●
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set
at 600mm or 24" to match standard data center floor tiles.
●
Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.
●
Compact design allows the enclosure to roll through standard height commercial doorways.
●
Convenient grounding system. All components are grounded to the enclosure frame which includes
●
2 / 4