OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APTD1608LSURCK

P1-P3P4-P4
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO7433 / 1203015403 Rev No: V.2A Date: 02/15/2017
Page 1 / 4
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.6 mm x 0.8 mm SMD LED, 0.95 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000pcs / reel
Moisture sensitivity level : level 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
APTD1608LSURCK
1.6 x 0.8 mm SMD Chip LED Lamp
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Part Number
Emitting Color
(Material)
Lens Type
Iv (mcd) @ 2mA
[2]
Viewing Angle
[1]
Min. Typ. 2θ1/2
APTD1608LSURCK
■ Hyper Red (AlGaInP)
Water Clear
50 110
*15 *30
60
°
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO7433 / 1203015403 Rev No: V.2A Date: 02/15/2017
Page 2 / 4
ABSOLUTE MAXIMUM RATINGS at T
A
=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at T
A
=25°C
APTD1608LSURCK
Parameter Symbol Emitting Color
Value
Unit
Typ. Max.
Wavelength at Peak Emission I
F
= 2mA λ
peak
Hyper Red
645 - nm
Dominant Wavelength I
F
= 2mA λ
dom
[1]
Hyper Red 630 - nm
Spectral Bandwidth at 50% Φ REL MAX
I
F
= 2mA
Δλ Hyper Red 28 - nm
Capacitance C Hyper Red 35 - pF
Forward Voltage I
F
= 2mA V
F
[2]
Hyper Red 1.75 2.1 V
Reverse Current (V
R
= 5V) I
R
Hyper Red - 10 uA
Temperature Coefficient of λ
peak
I
F
= 2mA, -10°C ≤ T ≤ 85°C
TC
λpeak
Hyper Red 0.14 - nm/°C
Temperature Coefficient of λ
dom
I
F
= 2mA, -10°C ≤ T ≤ 85°C
TC
λdom
Hyper Red 0.05 - nm/°C
Temperature Coefficient of V
F
I
F
= 2mA, -10°C ≤ T ≤ 85°C
TC
V
Hyper Red -1.8 - mV/°C
Min.
-
-
-
-
1.5
-
-
-
-
Parameter Symbol Unit
Power Dissipation P
D
75 mW
Reverse Voltage V
R
5 V
Junction Temperature T
j
115 °C
Operating Temperature T
op
-40 to +85 °C
Storage Temperature T
stg
-40 to +85 °C
DC Forward Current I
F
30 mA
Peak Forward Current I
FM
[1]
185 mA
Thermal Resistance (Junction / Ambient) R
th
JA
[2]
585 °C/W
Thermal Resistance (Junction / Solder point) R
th
JS
[2]
450 °C/W
Value
Electrostatic Discharge Threshold (HBM)
-
3000 V
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. R
th
JA
,R
th
JS
Results from mounting on PC board FR4 (pad size ≥ 16 mm
2
per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO7433 / 1203015403 Rev No: V.2A Date: 02/15/2017
Page 3 / 4
0
2
4
6
8
10
1.5 1.6 1.7 1.8 1.9 2.0
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0
2
4
6
8
10
0246810
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised
at 2 mA
0
10
20
30
40
50
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Permissible forward current
(mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous intensity normalised
at T
a
= 25 °C
0.5 0.50.0
-90°
-75°
-60°
-45°
-30°
-15°
75°
60°
45°
30°
0°
15°
90°
1.0 1.0
T
a
= 25 °C
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Wavelength (nm)
Relative Intensity (a. u.)
Hyper Red
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
HYPER RED
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
SPATIAL DISTRIBUTION
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve
Luminous Intensity vs.
Ambient Temperature
APTD1608LSURCK
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
P1-P3P4-P4

APTD1608LSURCK

Mfr. #:
Buy APTD1608LSURCK
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 0603 Dome Lens LED Red- 630nm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet