SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR,
ENVIRONMENT RESISTANT WITH LEAD
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
SO63-X-W1-GA-9-100
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DOC. ISSUE:
2
DATE:
28-Dec-04
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D020446
DCR NUMBER:
D040307
PROD. REV.:
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
© 2004 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Rev. Product Dimensions Cable Dimensions
Product
Name
Ident.
Code
L±1.75
(L±0.070)
øB
min
øC
min
øD
max
øE
max
øF
min
øG
min
SO63-1-W1-GA-9-100 N/C SO631R
16.50
(0.650)
1.90
(0.075)
2.65
(0.105)
1.90
(0.075)
2.65
(0.105)
0.90
(0.035)
0.50
(0.020)
SO63-2-W1-GA-9-100 N/C SO632R
16.50
(0.650)
2.65
(0.105)
3.68
(0.145)
2.65
(0.105)
3.68
(0.145)
1.40
(0.055)
0.75
(0.030)
SO63-3-W1-GA-9-100 N/C SO633R
16.50
(0.650)
4.30
(0.170)
5.08
(0.200)
4.30
(0.170)
5.08
(0.200)
2.15
(0.085)
1.25
(0.050)
SO63-4-W1-GA-9-100 N/C SO634R
19.10
(0.750)
5.95
(0.235)
6.45
(0.255)
5.95
(0.235)
6.45
(0.255)
3.30
(0.130)
1.80
(0.070)
SO63-5-W1-GA-9-100 N/C SO635R
19.10
(0.750)
7.00
(0.275)
7.60
(0.300)
7.00
(0.275)
7.60
(0.300)
4.30
(0.170)
2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221°C.
3. MELTABLE RING: Environment resistant thermoplastic. Color: blue.
4. GROUND LEAD: Stranded Silver-plated High Strength Copper in accordance with MIL-W-22759/81.
APPLICATION
1. These parts will provide a shield termination assembly when installed in accordance to Raychem RCPS-100-70 on cables
rated for at least 125°C, meeting the dimensional criteria listed, having tin or silver-plated shields.
2. Temperature rating: -55°C to +150°C.
3. Parts shall be marked with identification code per table.
For best results, prepare the cable as shown:
“G” is the minimum diameter on which the sleeve will seal.
Part Number Guide:
SO63-X-W1-GA-9-100
Lead color designation per MIL-STD-681
Lead AWG 22, 24
Lead type: M22759/81
Size 1 to 5
