Reference only
ETP1N201A
18 / 21
7. Taping specification
7-1. Dimension of capacitors on tape
Vertical crimp taping type < Lead code : N2 >
Pitch of component 12.7mm / Lead spacing 5.0mm
Unit : mm
Item Code Dimensions Remarks
Pitch of component
P 12.71.0
Pitch of sprocket hole
P0 12.70.3
Lead spacing
F 5.0
Length from hole center to component center
P2 6.351.3
Deviation of progress direction
Length from hole center to lead
P1 3.850.7
Body diameter
D
Please refer to [Part number list ].
Deviation along tape, left or right
S 01.0
They include deviation by lead bend .
Carrier tape width
W 18.00.5
Position of sprocket hole
W1 9.00.5
Deviation of tape width direction
Lead distance between reference and bottom
planes
H0 18.0
Protrusion length
0.51.0
Diameter of sprocket hole
D0 4.00.1
Lead diameter
d 0.600.05
Total tape thickness
t1 0.60.3
They include hold down tape thickness.
Total thickness, tape and lead wire
t2 1.5 max.
Deviation across tape, front
h1
1.0 max.
Deviation across tape, rear
h2
Portion to cut in case of defect
L 11.0
Hold down tape width
W0 11.5 min.
Hold down tape position
W2 1.51.5
Coating extension on lead
e
Up to the end of crimp
Body thickness
T
Please refer to [Part number list ].
2.0
0
0
1.0
0.8
0.2
