Reference only
ETP2D03
21 / 21
7-2. Splicing way of tape
1) Adhesive force of tape is over 3N at test condition as below.
2) Splicing of tape
a) When base tape is spliced
Base tape should be spliced by cellophane tape.
(Total tape thickness should be less than 1.05mm.)
b) When hold down tape is spliced
Hold down tape should be spliced with overlapping.
(Total tape thickness should be less than 1.05mm.)
ape are spliced
Base tape and adhesive tape should be spliced with splicing tape.
c) When both tape are spliced
Base tape and hold down tape should be spliced with splicing tape.
3 ) Missing components
There should be no consecutive missing of more than three components.
The number of missing components should be not more than 0.5% of
total components that should be present in a Ammo pack.
Hold down tape
Base tape
W
Unit : mm
Progress direction
in production line
Hold down tape
Base tape
Cellophane tape
bout 30 to 50
Progress direction
in production line
Hold down tape
Base tape
20 to 60
Unit : mm
No lifting for the direction of
progressing
